![]() |
Q1900-ITX |
Post Reply ![]() |
Author | |
beppepi ![]() Newbie ![]() Joined: 05 May 2020 Location: Bergamo Status: Offline Points: 3 |
![]() ![]() ![]() ![]() ![]() Posted: 05 May 2020 at 11:27pm |
Hello,
during last weekend, after quite few years of continuous usage, my home NAS based on the MB Q1900-ITX just died. At first I tried to reboot the system but the NAS would not power on (the PSU's fan tried to spin up for a couple of seconds and then died off). The speaker connected to the MB do not produce any sound during the 1/2 seconds of power on. Since no signs of life has been spotted I tried the following actions one at time, and as you may imagine without any luck: - Visually inspected the MB, no signs of burn out or excessive heat, deformations or physical damages; - Changed the BIOS battery, two times; - Swapped the PSU with another one (same exact model); - Changed the power button, two times; - Taken out ram and carefully reset in place; - Checked the connections to HDDs (both SATA and power) - Reset the BIOS on pin 2-3 (without battery) No action yielded positive results. The motherboard is just able to power on the PSU's fan for 1/2 seconds and then everything goes silent. After few seconds , autonomously, the fan start again spinning for 1/2 seconds and then stops (and the cycle get back). Do you have any idea if the MB is just dead or is there anything I con do to reset it to normal functionality? Thanks |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |