|
X99M Extreme4 NVMe ssd installation |
Post Reply 
|
| Author | |
Masterofnet 
Newbie 
Joined: 07 Dec 2015 Status: Offline Points: 19 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: X99M Extreme4 NVMe ssd installationPosted: 12 Dec 2015 at 10:15am |
|
I was looking over the Bios updates for the X99M Extreme4 boards.
 They were updated to support NVMe.  If you are installing Windows 10 on a NVMe ssd do you still need to use one of the methods you described in this post ( How To Install Windows On A PCIe SSD ) or can you install with the default UEFI?  On some boards you do not need to configure the UEFI.  Is that the case with the X99M Extreme4 boards?  |
|
 |
|
|
parsec
Moderator Group 
Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 Dec 2015 at 1:25pm |
|
Personally, I would still configure the single CSM option, Launch Storage OpROM Policy, set to UEFI only. Is that difficult or something that worries you?
Setting that CSM sub-option causes the Windows installer to use the EFI bootloader. That is the modern way to do things, and causes your board to actually use the UEFI firmware. Not setting that sub-option will cause the board to use the Legacy bootloader and MBR partitioning only. But please feel free to try installing Win 10 without setting that option. The standard Windows NVMe driver may simply do everything for you automatically, or allow you to install your PCIe SSD in Legacy mode. What are the boards that do not need to have the UEFI configured for PCIe NVMe SSDs? The only NVMe drives that exist for consumer use are the Intel 750 series, and its cousins, the P3000 Enterprise SSDs, or the Samsung 950 Pro and the NVMe version of the OEM SM951. The Intel installation guide for the 750 and the P3000 series is simply a guide to installing them in a mother board and installing the Intel NVMe driver, on an existing OS installation: https://downloadmirror.intel.com/23929/eng/Intel%20SSD%20Data%20Center%20Family%20for%20PCIe%20Installation%20Guide_330547-003.pdf You can also find the details for the condition that allows the P3000 series to be bootable. If your Win 10 installation works for you without any UEFI configuration, great, and I am wrong. I'd like to see how it is partitioned after the installation, if it works without and UEFI configuration. |
|
|
|
|
|
|
Masterofnet
Newbie
Joined: 07 Dec 2015 Status: Offline Points: 19 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 Dec 2015 at 5:04pm |
|
According to Intel some of these boards not need to have the UEFI configured for PCIe NVMe SSDs. http://download.intel.com/support/ssdc/hpssd/sb/nvme_boot_guide_332098001us.pdf I was going to set everything to UEFI + CSM disabled, start the Windows 10 set up from within the Bios and attempt to merge two boot-up screens together into one screen.  Will that work with the X99M Extreme4 Bios?  Thanks Edited by Masterofnet - 13 Dec 2015 at 1:58am |
|
|
|
|
Masterofnet
Newbie
Joined: 07 Dec 2015 Status: Offline Points: 19 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Dec 2015 at 2:38am |
|
Why is using a USB flash drive (the preferred method) as opposed to an optical disk for installing Windows in UEFI???
 |
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options