B350PRO4 1500x to 3000 CPU upgrade

My 3600 arriving today later in the evening i decide to take the eisk and upgrade to 5.80 bios

I had some issue to post and with display output not working but after some fiddling it works now

The PC with 1500x and Ram OCed is fine as prior BIOS upgrade thats a big relief if i want to sell the combo to a new owner

3500X 4.4Ghz at 1.25V B550M Steel legend; 16GB CORSAIR LPX-3200 C16 running at 3333Mhz; 248GB NVME; VEGA 64 LC GPU OC 1700Mhz core 1150Mhz VRAM

kind of defeat what I am trying to get as an advice over here if I have to run this and found out by myself afterwards that there is Zero possibility to revert back the BIOS on my MB and run the 1500X as it used to be.

anybody who could share some helpful thoughts here?

3500X 4.4Ghz at 1.25V B550M Steel legend; 16GB CORSAIR LPX-3200 C16 running at 3333Mhz; 248GB NVME; VEGA 64 LC GPU OC 1700Mhz core 1150Mhz VRAM

thanks for your reply.

I am not too much concerned by the process of upgrading the BIOS and get my RAM to reach its 3200Mhz frequency at least, although its not too bad that its running at 3133Mhz already today.

my question was more if say in 6 months I want to sell my PRO4 MB, I will certainly bundle it with the 1500X and would like to bring back BIOS to 5.40 where ASROCK says its not possible, other vendors MB can do that.Thats really my question about BIOS

3500X 4.4Ghz at 1.25V B550M Steel legend; 16GB CORSAIR LPX-3200 C16 running at 3333Mhz; 248GB NVME; VEGA 64 LC GPU OC 1700Mhz core 1150Mhz VRAM

Hello

I have the possibility to get a 3000 CPU relatively cheap so I am tempted to upgrade from my 1500X current one.

2 things I would like to clarify so looking for assistance.

I am currently on BIOS 5.40 on my B350 PRO4 MB and planning to upgrade to 5.80 which is the 1st one on ASROCK support to capture 3000series CPU right?

Then I see these 2 comments there

1) VGA drivers

I ahve a VEGA 64 GPU, do I need to install this VGA driver anyway, is that really a must?

* Please install "AMD all in 1 with VGA driver ver:18.50.16.01_WHQL" or a later version before updating to this BIOS.
** If you updated the BIOS before updating the AMD all in one driver, please refer to the Display recovery SOP to recover your system.

2) BIOS flash back to older version

Is there a way to flashback to before 5.80 BIOS if for example I decide to sell my MB and 1500X as 2nd hand combo? It says here it can not be reverted but I found that MSI or ASUS BIOS downgrade can be done with some specific tool, is such tool not available for ASROCK?

*** If the current BIOS version is older than P5.40, please update BIOS to P5.40(PinnaclePI-AM4_1.0.0.6) before updating this version.
**** User will not able to flash previous BIOS once upgrading to this BIOS version.

Thanks so much

Olivier

3500X 4.4Ghz at 1.25V B550M Steel legend; 16GB CORSAIR LPX-3200 C16 running at 3333Mhz; 248GB NVME; VEGA 64 LC GPU OC 1700Mhz core 1150Mhz VRAM

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
datonyb Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3154	Post Options Post Reply Quote datonyb Report Post Thanks(0) Quote Reply Topic: B350PRO4 1500x to 3000 CPU upgrade Posted: 03 Aug 2020 at 10:08pm
	this is what threedee was trying to tell you there shouldnt be a problem using a 1500x with the later bios......... so no need to flash back
	[url=https://valid.x86.fr/jpg250][/url] 3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold

nolive721 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 29 Jan 2018 Location: japan Status: Offline Points: 87	Post Options Post Reply Quote nolive721 Report Post Thanks(0) Quote Reply Posted: 02 Aug 2020 at 12:24pm
	My 3600 arriving today later in the evening i decide to take the eisk and upgrade to 5.80 bios I had some issue to post and with display output not working but after some fiddling it works now The PC with 1500x and Ram OCed is fine as prior BIOS upgrade thats a big relief if i want to sell the combo to a new owner
	3500X 4.4Ghz at 1.25V B550M Steel legend; 16GB CORSAIR LPX-3200 C16 running at 3333Mhz; 248GB NVME; VEGA 64 LC GPU OC 1700Mhz core 1150Mhz VRAM

ThreeDee Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396	Post Options Post Reply Quote ThreeDee Report Post Thanks(0) Quote Reply Posted: 29 Jul 2020 at 10:10pm
	okay . .nevermind then good luck with your future endeavors
	\|Ryzen 5 5900\|ASRock X570 Taichi-BIOS 4.60\|2x16GB HyperX Predator RGB 3200@3600 1:1 IF\|ASRock RX 6700XT\|2 x PCIe 4.0 M.2 Drives for OS & Games\|850 WTT Seasonic 80+ Titanium PSU\|Noctua NH-D15\|

nolive721 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 29 Jan 2018 Location: japan Status: Offline Points: 87	Post Options Post Reply Quote nolive721 Report Post Thanks(0) Quote Reply Posted: 29 Jul 2020 at 9:09pm
	kind of defeat what I am trying to get as an advice over here if I have to run this and found out by myself afterwards that there is Zero possibility to revert back the BIOS on my MB and run the 1500X as it used to be. anybody who could share some helpful thoughts here?
	3500X 4.4Ghz at 1.25V B550M Steel legend; 16GB CORSAIR LPX-3200 C16 running at 3333Mhz; 248GB NVME; VEGA 64 LC GPU OC 1700Mhz core 1150Mhz VRAM

ThreeDee Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396	Post Options Post Reply Quote ThreeDee Report Post Thanks(0) Quote Reply Posted: 29 Jul 2020 at 3:16pm
	Why sell yourself short .. you bought and paid for 3200mhz RAM .. why wouldn't you want your product to run at least at it's rated speed? 3600mhz is kind of the sweet spot for Ryzen ... but I digress. You can run your own tests .. when you flash the BIOS to accommodate your new 3000 series cpu .. reboot and test out your 1500x on your new bios before switching processors .. then you can decide if rolling back the BIOS version is needed or not and then go from there
	\|Ryzen 5 5900\|ASRock X570 Taichi-BIOS 4.60\|2x16GB HyperX Predator RGB 3200@3600 1:1 IF\|ASRock RX 6700XT\|2 x PCIe 4.0 M.2 Drives for OS & Games\|850 WTT Seasonic 80+ Titanium PSU\|Noctua NH-D15\|

nolive721 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 29 Jan 2018 Location: japan Status: Offline Points: 87	Post Options Post Reply Quote nolive721 Report Post Thanks(0) Quote Reply Posted: 29 Jul 2020 at 1:20pm
	thanks for your reply. I am not too much concerned by the process of upgrading the BIOS and get my RAM to reach its 3200Mhz frequency at least, although its not too bad that its running at 3133Mhz already today. my question was more if say in 6 months I want to sell my PRO4 MB, I will certainly bundle it with the 1500X and would like to bring back BIOS to 5.40 where ASROCK says its not possible, other vendors MB can do that.Thats really my question about BIOS
	3500X 4.4Ghz at 1.25V B550M Steel legend; 16GB CORSAIR LPX-3200 C16 running at 3333Mhz; 248GB NVME; VEGA 64 LC GPU OC 1700Mhz core 1150Mhz VRAM

ThreeDee Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396	Post Options Post Reply Quote ThreeDee Report Post Thanks(0) Quote Reply Posted: 29 Jul 2020 at 12:11pm
	just have latest chipset drivers installed from AMD.com before you upgrade your BIOS. Even though ASRock says it's "not recommeded" .. Everything should run just fine with latest bios and your 1500x. Be sure to update your video cards drivers too at some point if you haven't already. With 3000 series, you'll be able to run your memory above and beyond it's rated speed more than likely. My daughter has the ASRock B350 Fatal1ty Gaming ITX/ac ..initially had the 2200g and had to run her 2 x 16gb 3000mhz sticks at 2866mhz .. that carried over to upgrading her to a 2700x paired with a GTX 1060 3GB .. upgraded her to a 3600x and now that same memory does 3200mhz (got her an RX 570 4GB too)
	\|Ryzen 5 5900\|ASRock X570 Taichi-BIOS 4.60\|2x16GB HyperX Predator RGB 3200@3600 1:1 IF\|ASRock RX 6700XT\|2 x PCIe 4.0 M.2 Drives for OS & Games\|850 WTT Seasonic 80+ Titanium PSU\|Noctua NH-D15\|

nolive721 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 29 Jan 2018 Location: japan Status: Offline Points: 87	Post Options Post Reply Quote nolive721 Report Post Thanks(0) Quote Reply Posted: 29 Jul 2020 at 9:53am
	Hello I have the possibility to get a 3000 CPU relatively cheap so I am tempted to upgrade from my 1500X current one. 2 things I would like to clarify so looking for assistance. I am currently on BIOS 5.40 on my B350 PRO4 MB and planning to upgrade to 5.80 which is the 1st one on ASROCK support to capture 3000series CPU right? Then I see these 2 comments there 1) VGA drivers I ahve a VEGA 64 GPU, do I need to install this VGA driver anyway, is that really a must? * Please install "AMD all in 1 with VGA driver ver:18.50.16.01_WHQL" or a later version before updating to this BIOS. If you updated the BIOS before updating the AMD all in one driver, please refer to the Display recovery SOP to recover your system. 2) BIOS flash back to older version Is there a way to flashback to before 5.80 BIOS if for example I decide to sell my MB and 1500X as 2nd hand combo? It says here it can not be reverted but I found that MSI or ASUS BIOS downgrade can be done with some specific tool, is such tool not available for ASROCK? * If the current BIOS version is older than P5.40, please update BIOS to P5.40(PinnaclePI-AM4_1.0.0.6) before updating this version. **** User will not able to flash previous BIOS once upgrading to this BIOS version. Thanks so much Olivier
	3500X 4.4Ghz at 1.25V B550M Steel legend; 16GB CORSAIR LPX-3200 C16 running at 3333Mhz; 248GB NVME; VEGA 64 LC GPU OC 1700Mhz core 1150Mhz VRAM