|
Disabled guy needs help Asrock H170 Pro4 |
Post Reply 
|
| Author | |
Asrock H170 Pro4 
Newbie 
Joined: 10 Jan 2016 Location: USA Status: Offline Points: 11 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Disabled guy needs help Asrock H170 Pro4Posted: 10 Jan 2016 at 6:08am |
|
New purchase Asrock H170 Pro4 Flashed new BIOS 1.90 Windows 10 Professional Clean Install on a Samsung 950 Pro 250gb M.2 device. The system is set at User Defaults The main problem: I seem to have lost mouse support. I.e. the mouse pointer does not move but it is visible (locked?). However??br>If I use the disabled mouse keys in the accessibility options of Windows 10 it works just fine. But I need support for an old PS/2 mouse plugged into the mouse/keyboard port (I'm disabled). I am under the Under Advanced Tab under USB. Perhaps I'm in the wrong BIOS area? I am missing the port 60/64 emulation that was listed. Was this removed and the BIOS update to 1.90? (As shown in the owners manual for the motherboard/BIOS) The BIOS manual shows what you see below. However, my BIOS no longer list these functions. Found under 4.4.6 chapter of the UEFI set up utility chapter. But now missing in my BIOS. Everything is unplugged from the back of the computer except for network and USB keyboard and of course mouse through the PS/2 input port. Is the 60/64 emulation missing or removed in the newer BIOS versions? Do I have a bad BIOS flash perhaps? The system seems to be working fine now other than the mouse problem. If so, how can I flashback to the old BIOS 1.00 if I have to? I've tried BIOS 1.60 and I still have the same problem i.e. no mouse support through the PS/2/keyboard port. Can anybody verify for me if they still have port 60/64 emulation present in BIOS 1.90?
Unfortunately, I did not back up my BIOS when I first updated! If somebody has the old original BIOS version could they check to see if 60/64 emulation is present please? The reason why I upgraded the BIOS was for the improved M.2 support. Thank you for your help, Joseph |
|
 |
|
|
Xaltar
Moderator Group 
Joined: 16 May 2015 Location: Europe Status: Online Points: 25073 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Jan 2016 at 6:32am |
|
Does the mouse still work in the UEFI? If so then it may be a windows issue after the update.
To eliminate windows as the issue: 1. Run msconfig.exe 2. under the "boot" tab check safe mode 3. Apply and reboot Once in safe mode run msconfig.exe again and uncheck safe mode then reboot again. With windows 8 and above this re initializes all essential drivers including chipset, USB and SATA etc. If that does not correct the issue let us know, it is ill advised to flash boards back to older BIOS versions as it can on occasion cause issues.
|
|
|
|
|
parsec
Moderator Group
Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Jan 2016 at 2:10pm |
|
I don't own your board, so cannot help directly with hands on experience.
The Port 60/64 Emulation option was in the Advanced -> USB Configuration screen according to your board's manual. The notes for this option states, "Enable this option if you install Windows 7.". All this may be related to the Intel 100 series chipsets USB and Windows 7 problem of no driver support from Intel. Meaning that is why that option was removed. You are using Windows 10 now, but it seems that option existed after your change to Windows 10, is that right? Some UEFI/BIOS updates to earlier versions can be safe, you aren't using an Intel 6 series chipset with the Ivy Bridge compatibility BIOS update insanity that gave BIOS updates a bad reputation. Since you have already done a BIOS change to an earlier version and survived (you'd know if you didn't) IMO it is safe to do it again, but using Instant Flash ONLY!!  There is a way to get to the download server for earlier BIOS versions, but of course that escapes me right now.  |
|
|
|
|
|
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Jan 2016 at 7:52pm |
|
Port 60/64
Emulation only affects the native Intel USB ports, not the PS/2 ports. So seeings you are using a PS/2 keyboard and mouse, that dog don't hunt
I would suggest doing a long BIOS clearing. Not just simply using the Clear CMOS button. Otherwise ........ Google Linkage - PS/2 to USB Adapter Can be had at most any office supply, BestBuy, Frys, Walmart, etc etc. You might even have one laying around there and not given it a thought. They come with a lot of newer PS/2 mice right in the box, free. Those won't necessarily work for more advanced multi function mice as most times the software provided to accommodate advanced function isn't "smart' enough to look to a USB port for recognition and handshake that says "Hi! I'm located here on a USB port instead of PS/2'' Along with standard and 3/4/5 button Roller ball mice it should work fine for. YMMV, but for the price it's another option. |
|
|
|
|
Asrock H170 Pro4
Newbie
Joined: 10 Jan 2016 Location: USA Status: Offline Points: 11 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 Jan 2016 at 3:36am |
|
Thank you all very much for the tips and suggestions. Unfortunately the 60/64 option is no longer listed in my BIOS. Perhaps it was removed in version 1.9? I originally had it and used it to make the mouse work. After I upgraded the BIOS, it was no longer present which is why I thought I may have had a bad upgrade but the computer is working very well.
The good news is as I was able to find in one of my closets a serial port adapter which the mouse needs and plugged it into the COM1 port on the motherboard. So now all is working well! Thank you all again for your suggestions, Joseph
|
|
|
|
|
Asrock H170 Pro4
Newbie
Joined: 10 Jan 2016 Location: USA Status: Offline Points: 11 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 Jan 2016 at 3:44am |
|
No it didn't work under UEFI in the BIOS or in Windows 10. It did before I originally flashed to the latest BIOS. Perhaps Asrock removed 60/64 emulation because mine does not list it in BIOS revision 1.9 or 1.90. All is well, thanks for your tips and suggestions! Xaltar??/div>
|
|
|
|
|
ASRock_TSD
ASRock_Official 
Joined: 20 Mar 2015 Status: Offline Points: 8787 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jan 2016 at 8:29pm |
|
Dear Customers,
Greetings, this is ASRock Technical Support Department. First, please be noted that we modified the name of "60/64 emulation" to "PS/2 Simulator" in later BIOS version. Regarding your problem, please set 'PS2 Y-cable' to 'Auto' in BIOS to use the PS/2 mouse. (BIOS -> Advanced -> Super IO Configuration -> Set 'PS2 Y-cable' item to 'Auto' If the problem still, please use another PS/2 mouse to verify, thank you! Kindest Regards, ASRock TSD Edited by ASRock_TSD - 14 Jan 2016 at 8:33pm |
|
|
|
|
PainterArt
Newbie
Joined: 31 Oct 2015 Status: Offline Points: 78 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Jan 2016 at 1:02am |
|
I read this for another problem, but I just want to note you can use the A > B switch on your motherboard (if it has it) to go to your back up BIOS which is not flashed and should be the older bios. You can then copy that to your A BIOS.
|
|
|
|
|
Asrock H170 Pro4
Newbie
Joined: 10 Jan 2016 Location: USA Status: Offline Points: 11 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Jan 2016 at 4:37am |
|
Thanks for the tip. But my board does not have the dual BIOS chip setup unfortunately.
It would have been a nice clean solution but I wasn't thinking about it when I bought the motherboard. Thanks for the suggestion, Joseph
|
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options