![]() |
Computer won't boot when graphics card installed! |
Post Reply ![]() |
Author | |
sk80au ![]() Newbie ![]() Joined: 25 Oct 2020 Status: Offline Points: 11 |
![]() ![]() ![]() ![]() ![]() Posted: 25 Oct 2020 at 8:22pm |
Hi,
I received my computer parts to build my new gaming PC however when the PC didn't boot at all. CPU fan won't work and there is no POST. I disconnected the graphics card and PC boots. My cpu doesn't have a iGPU so I can't see the BIOS screen without extrnal gpu. I connected the 8-pin EPS to motherboard + the 8-pin PCIe power to graphics card. Tested with two different PSU and two graphucs card with no luck! I assume the Motherboard ( B460m-ITX) has a faulty PCIe slot. Any ideas? Cheers. Sam |
|
![]() |
|
ASRock_TSD ![]() ASRock_Official ![]() Joined: 20 Mar 2015 Status: Offline Points: 8787 |
![]() ![]() ![]() ![]() ![]() |
Dear Sk80au,
Thank you for contacting ASRock. Regarding your question, when the system will no boot, it can most likely be the CPU and RAM. Kindly refer to the link below and try. https://www.asrock.com/support/faq.asp?id=490 With thanks, ASRock TSD |
|
![]() |
|
sk80au ![]() Newbie ![]() Joined: 25 Oct 2020 Status: Offline Points: 11 |
![]() ![]() ![]() ![]() ![]() |
It's not the CPU or memory issue. If I connect a graphics card that doesn't require additional 6 or 8pin power then the system starts.
|
|
![]() |
|
ASRock_TSD ![]() ASRock_Official ![]() Joined: 20 Mar 2015 Status: Offline Points: 8787 |
![]() ![]() ![]() ![]() ![]() |
Dear sk80au,
Thanks for the reply. Could you kindly provide the following information to us? 1. Please check if the power supply has enough power to support the system. 2. BIOS version. 3. CPU model. 4. Graphics card. With thanks, ASRock TSD |
|
![]() |
|
sk80au ![]() Newbie ![]() Joined: 25 Oct 2020 Status: Offline Points: 11 |
![]() ![]() ![]() ![]() ![]() |
I fixed this issue. Here's how:
My motherboard is ASRock B460m-ITX/AC with old BIOS 1.10 1- plugged in a very old graphics card so that system can boot 2- updated the BIOS from 1.10 to 1.40. 3- Restarted the computer and shut it down then disconnect the power from PSU and inserted the new graphics card. The syatem booted and loaded! |
|
![]() |
|
blazekayn ![]() Newbie ![]() ![]() Joined: 31 Jul 2021 Location: USA Status: Offline Points: 45 |
![]() ![]() ![]() ![]() ![]() |
Was this issue resolved? I seem to be having the same issue. When I connect a graphics card that requires both 8 pin and 6 pin it will not boot. When I use any other card that only requires 8pin it boots every time.
Thanks. |
|
Blaze
|
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 25208 |
![]() ![]() ![]() ![]() ![]() |
This is typically either a sign of a dying PSU or a PSU that isn't powerful enough
for the load being applied to it. Some PSUs have more than one 12v rail, in essence it means more than one transformer is used inside the PSU for the 12v outputs. In these cases it is possible to overload one of the rails and end up with power issues even though the PSU is seemingly rated for much higher loads. This is why I always recommend a single rail PSU with at least 50A on the 12v rail for gaming setups. Multi rail PSUs are typically either used in "silent" applications or workstation/server environments. So, if you are using a single rail PSU it is either dying or not powerful enough. If you are using a multi rail PSU you can try changing up the cables connected to the GPU, swap one of them for another one from a different rail. This will balance the load and may resolve your issue. |
|
![]() |
|
![]() |
|
blazekayn ![]() Newbie ![]() ![]() Joined: 31 Jul 2021 Location: USA Status: Offline Points: 45 |
![]() ![]() ![]() ![]() ![]() |
I have another PSU I can try. I'll do that today.
|
|
Blaze
|
|
![]() |
|
blazekayn ![]() Newbie ![]() ![]() Joined: 31 Jul 2021 Location: USA Status: Offline Points: 45 |
![]() ![]() ![]() ![]() ![]() |
It was the PSU. I changed to another one and it works fine now. I just wanted to add for other people who see this that the issue was intermittent. It seemed like 1/3 of the time the PC would boot and operate normally for hours on end.
|
|
Blaze
|
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 25208 |
![]() ![]() ![]() ![]() ![]() |
Thanks for coming back to share your findings
![]() Enjoy the upgrade ![]() |
|
![]() |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |