![]() |
5 Short beep on start up |
Post Reply ![]() |
Page 12> |
Author | |
muziqaz ![]() Groupie ![]() ![]() Joined: 04 Jan 2021 Location: London Status: Offline Points: 590 |
![]() ![]() ![]() ![]() ![]() Posted: 02 Feb 2021 at 9:01pm |
Hm, your 12V rail has ripple of 196mV, which is too high, and 3.3V has 76mV ripple which again is a bit too high. However I am not Electrical Engineer, and PSU specs are a bit muddy, since some say that PSUs tend to "ripple" out of specs when not loaded. You could download HWInfo app, start it, scroll to all the voltages, then load your system with a benchmark or something, and observe how voltages are behaving. Basically 12V rail's maximum ripple can be 120mV plus or minus, so if you see 12.120V, that is still within specs, same with 11.880V. Yours is 12.196V 3.3V rail I believe has 50mV spec allowance. So if you see 3.350V, that is still acceptable. Yours is 3.376V |
|
folding@home
|
|
![]() |
|
pipipo3 ![]() Newbie ![]() Joined: 26 Jan 2021 Status: Offline Points: 12 |
![]() ![]() ![]() ![]() ![]() |
[URL=https://s.amsu.ng/Qjde5hE0afRN]Voltages[/URL]
|
|
![]() |
|
muziqaz ![]() Groupie ![]() ![]() Joined: 04 Jan 2021 Location: London Status: Offline Points: 590 |
![]() ![]() ![]() ![]() ![]() |
The link has expired |
|
folding@home
|
|
![]() |
|
muziqaz ![]() Groupie ![]() ![]() Joined: 04 Jan 2021 Location: London Status: Offline Points: 590 |
![]() ![]() ![]() ![]() ![]() |
That is normal. |
|
folding@home
|
|
![]() |
|
pipipo3 ![]() Newbie ![]() Joined: 26 Jan 2021 Status: Offline Points: 12 |
![]() ![]() ![]() ![]() ![]() |
Using MSI Afterburner I have seen that on idle the voltage for the GPU is 625mV and while playing a game 1050mV
|
|
![]() |
|
pipipo3 ![]() Newbie ![]() Joined: 26 Jan 2021 Status: Offline Points: 12 |
![]() ![]() ![]() ![]() ![]() |
This is all I could find about the voltages in the BIOS, not sure if the GPU is one of them:
[URL=https://s.amsu.ng/AtIJLrRJ5JON]Voltages[/URL] |
|
![]() |
|
muziqaz ![]() Groupie ![]() ![]() Joined: 04 Jan 2021 Location: London Status: Offline Points: 590 |
![]() ![]() ![]() ![]() ![]() |
Swapping for another PSU.
In BIOS there should be a section telling you all the main voltage outputs. Would be interesting to see the values |
|
folding@home
|
|
![]() |
|
pipipo3 ![]() Newbie ![]() Joined: 26 Jan 2021 Status: Offline Points: 12 |
![]() ![]() ![]() ![]() ![]() |
During the first day it did not beep, but now it has beeped already two times in all.
What else could I do? |
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 25508 |
![]() ![]() ![]() ![]() ![]() |
Good luck
![]() |
|
![]() |
|
![]() |
|
pipipo3 ![]() Newbie ![]() Joined: 26 Jan 2021 Status: Offline Points: 12 |
![]() ![]() ![]() ![]() ![]() |
I have now done that, I will let you know
|
|
![]() |
Post Reply ![]() |
Page 12> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |