X570 Taichi ram advice

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   As parts trickle in, I've finally committed to an AMD build. I'm still deciding on ram and cpu. My thoughts are x5900 and the most ram the Taichi will hold, 128gb of ram that works well in this MOBO.
Can I ask for opinions on a tried & true cpu and ram combination£ I would appreciate it, as those are the last two parts I need. 
By the way, this is strictly a DAW audio work station for those who may have built a DAW with these parts.
Thanks

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
jazzyanne Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 05 Jan 2020 Status: Offline Points: 76	Post Options Post Reply Quote jazzyanne Report Post Thanks(0) Quote Reply Topic: X570 Taichi ram advice Posted: 14 Mar 2021 at 1:49pm
	As parts trickle in, I've finally committed to an AMD build. I'm still deciding on ram and cpu. My thoughts are x5900 and the most ram the Taichi will hold, 128gb of ram that works well in this MOBO. Can I ask for opinions on a tried & true cpu and ram combination£ I would appreciate it, as those are the last two parts I need. By the way, this is strictly a DAW audio work station for those who may have built a DAW with these parts. Thanks

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24518	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 14 Mar 2021 at 11:27pm
	RAM can be tricky, especially high capacity kits but I would recommend you check out GSkill's AMD tuned offerings, find a kit with nice tight timings for DAW work. Speed isn't as important as latency so don't be shy to go for a 2666 kit (4x32) with tight timings vs a high frequency kit with loose ones. I would also advise that you install your GPU in the lower X16 slot to keep airflow over your chipset unimpeded, a shorter GPU in the top slot will also work well. The last thing you want, unless you will be keeping the PC isolated, is the noise from the fan (electrical and actual audible) interfering with your recordings. That little chipset fan can put out quite a racket if it's not getting enough air. Given the X570 Taichi is a higher end board it should be included on many RAM vendor's QVL pages.


jazzyanne Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 05 Jan 2020 Status: Offline Points: 76	Post Options Post Reply Quote jazzyanne Report Post Thanks(0) Quote Reply Posted: 15 Mar 2021 at 3:47am
	Never thought about the GPU placement. Also, I was focused on high speed ram and lost sight of latency. Can you suggest a model number ram and cpu that you may have had experience with£ If it's allowed on the forum, my first post. Thank you for your response and feedback.

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24518	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 15 Mar 2021 at 6:47am
	I'm afraid I can't help on that front, my DAW is Threadripper based, completely different RAM support and I am only running 64gb. GSkill has good compatibility with AMD and lists most ASRock boards in their QVLs, hence my suggestion. Check out their website and products.


jazzyanne Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 05 Jan 2020 Status: Offline Points: 76	Post Options Post Reply Quote jazzyanne Report Post Thanks(0) Quote Reply Posted: 15 Mar 2021 at 11:06am
	Thank you

BenjaminValles Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 05 Mar 2021 Status: Offline Points: 105	Post Options Post Reply Quote BenjaminValles Report Post Thanks(0) Quote Reply Posted: 18 Mar 2021 at 8:43pm
	I've just moved from the MSI Pro Carbon X570 to the ASRock Taichi X570 and am having issues with my G.Skill Trident Z 3600 C17 Kit. When I try to boot the XMP profile at 3600mhz on the Taichi it will post but not boot to Windows. The same kit worked at this speed on the MSI mobo.