XMP Profile issues on Z170 Extreme7+

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I just built my system last night with the following memory kit,
G.Skill TridentZ Series 16GB (4 x 4GB) DDR4 3733 

At first The XMP profile seemed to be working perfectly I had no issues it was booting into bios fine restarting fine no issues (there was no OS at this point though) While I was waiting for my USB installation media to finish being created I decided to update the bios to the new 2.50. Since then the xmp profile to set the memory at the stock clock of 3733 causes the board not to boot and fail then ask me to enter the bios and change the settings. 

anyone know of a good way of resolving this issue? Even if it's rolling back a BIOS ver I don't mind. 

Thanks for the assistance.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
pvt.dancer Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 30 Jan 2016 Location: USA, OR Status: Offline Points: 4	Post Options Post Reply Quote pvt.dancer Report Post Thanks(0) Quote Reply Topic: XMP Profile issues on Z170 Extreme7+ Posted: 30 Jan 2016 at 3:24am
	I just built my system last night with the following memory kit, G.Skill TridentZ Series 16GB (4 x 4GB) DDR4 3733 At first The XMP profile seemed to be working perfectly I had no issues it was booting into bios fine restarting fine no issues (there was no OS at this point though) While I was waiting for my USB installation media to finish being created I decided to update the bios to the new 2.50. Since then the xmp profile to set the memory at the stock clock of 3733 causes the board not to boot and fail then ask me to enter the bios and change the settings. anyone know of a good way of resolving this issue? Even if it's rolling back a BIOS ver I don't mind. Thanks for the assistance.

wardog Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447	Post Options Post Reply Quote wardog Report Post Thanks(1) Quote Reply Posted: 30 Jan 2016 at 3:30am
	You can back-flash so long as you have a stable system. Use the Instant Flash method and file.

pvt.dancer Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 30 Jan 2016 Location: USA, OR Status: Offline Points: 4	Post Options Post Reply Quote pvt.dancer Report Post Thanks(0) Quote Reply Posted: 30 Jan 2016 at 3:35am
	Thanks War, This is my first ASRock so I wasn't sure what features were available. (Yet) Yes the system is stable as long as I use the auto settings. With Auto I installed windows drivers the whole nine no problem. I'll give that a go tonight. Much appreciated.