ASRock.com Homepage
Forum Home Forum Home > Technical Support > Intel Motherboards
  New Posts New Posts RSS Feed - Motherboard supports Intel 10th generation
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

Motherboard supports Intel 10th generation

 Post Reply Post Reply
Author
Message
idanchen View Drop Down
Newbie
Newbie


Joined: 02 Sep 2021
Status: Offline
Points: 35
Post Options Post Options   Thanks (0) Thanks(0)   Quote idanchen Quote  Post ReplyReply Direct Link To This Post Topic: Motherboard supports Intel 10th generation
    Posted: 02 Sep 2021 at 4:43pm
Hello. Sorry for my English.

1. I have an i5 10400 Q0 processor with integrated graphics. It is the 10th generation. Will all the m2 slots on the motherboard below work with this processor (the motherboard was designed for 11th gen processors but works with the 10th as well, according to the spec on the website)? Or will the SSD disk not start? And will the i5 10400 Q0 processor work?

https://www.asrock.com/mb/Intel/Z590M-ITXax/index.ru.asp#Specification
https://www.asrock.com/mb/Intel/B560M-ITXac/index.ru.asp#Specification
https://www.asrock.com/mb/Intel/H570M-ITXac/index.ru.asp#Specification (I found comments where people complained that it burned out, defective)

2. Comment on the news. Do the listed motherboards have this problem? Does the problem extend to the 10th generation on these motherboards as well?

Owners of budget motherboards on the Intel B560 chipset may experience a severe drop in performance of Core 11 generation processors. Their frequency can be more than 50% lower than nominal due to incorrect basic BIOS settings, and even changing them can not completely solve the problem.

3. SSD KINGSTON NV1 SNVS/1000G 1Tb / SNVS/500G 500 Gb work with these motherboards? A good SSD?
Back to Top
idanchen View Drop Down
Newbie
Newbie


Joined: 02 Sep 2021
Status: Offline
Points: 35
Post Options Post Options   Thanks (0) Thanks(0)   Quote idanchen Quote  Post ReplyReply Direct Link To This Post Posted: 02 Sep 2021 at 6:06pm
4. The Z590M-ITX/ax motherboard says:

- 1 x Hyper M.2 connector (M2_1), supporting M Key 2280 M.2 PCIe devices up to Gen4x4 (64Gb/s) (Socket M2_1 with 11th generation IntelĀ® Core??only)*
- 1 x Ultra M.2 connector (M2_2), supporting M.2 SATA3 6.0Gb/s M Key 2280 and M.2 PCIe devices up to Gen3 x4 (32Gb/s)

Does that mean only one m2 slot will work with the i5 10400? There are 2 slots on this motherboard.
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.125 seconds.