Xmp |
Post Reply |
Author | |
Taken14
Newbie Joined: 04 Dec 2021 Location: Ohio Status: Offline Points: 95 |
Post Options
Thanks(0)
Posted: 04 Dec 2021 at 1:03pm |
Can you please help. When I turn on xmp to get my full speed of ram I reboot and go to the task manager and click performance it still shows 2133mhz. Xmp doest not work neither does just manually overclock.
|
|
Taken14
Newbie Joined: 04 Dec 2021 Location: Ohio Status: Offline Points: 95 |
Post Options
Thanks(0)
|
And I have a Z390 Phantom Gaming motherboard
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 22793 |
Post Options
Thanks(0)
|
Make sure your RAM is in slots A2 and B2. These are the primary slots and often
XMP will not properly enable when RAM is in slots A1 and B1. If all slots are populated XMP will enable fine but when only using 1 or 2 modules they need to be in slots A2 and B2 or just slot A2. This has to do with how the CPU addresses the memory. |
|
|
|
Taken14
Newbie Joined: 04 Dec 2021 Location: Ohio Status: Offline Points: 95 |
Post Options
Thanks(0)
|
Thankyou so that means I can never use all my slots if I want to get the faster memory
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 22793 |
Post Options
Thanks(0)
|
No, you can, if slots A2 and B2 are populated as well as A1 and B1 you can enable
XMP. It's only when you are using 2 sticks that you need to use A2 and B2. Sorry I phrased my original post poorly. Slots A2 and B2 MUST be populated to enable XMP. It will work if all slots are populated because A2 and B2 have RAM installed. I hope this is clearer. |
|
|
|
Taken14
Newbie Joined: 04 Dec 2021 Location: Ohio Status: Offline Points: 95 |
Post Options
Thanks(0)
|
I have have 4 sticks already
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 22793 |
Post Options
Thanks(0)
|
Are they all the same model?
|
|
|
|
Taken14
Newbie Joined: 04 Dec 2021 Location: Ohio Status: Offline Points: 95 |
Post Options
Thanks(0)
|
Yes all the same model everything
|
|
Taken14
Newbie Joined: 04 Dec 2021 Location: Ohio Status: Offline Points: 95 |
Post Options
Thanks(0)
|
There called trident something
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 22793 |
Post Options
Thanks(0)
|
Hmm, could require you to manually set them up. Using 4 DIMMs is a lot more taxing
on the IMC in the CPU and the RAM power delivery on the board. Do a google search for manually setting RAM timings, frequency and voltages for Ryzen. There are a ton of better guides out there than I can type in a post for you. I suspect you may need to bump some voltages up a bit to get your full frequency (or at least closer to it). Good luck and let us know how it goes. |
|
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |