![]() |
disabling csm causes stuck boot to bios |
Post Reply ![]() |
Author | |
CptnSpaulding71 ![]() Newbie ![]() ![]() Joined: 08 Mar 2017 Location: USA Status: Offline Points: 75 |
![]() ![]() ![]() ![]() ![]() Posted: 21 Mar 2022 at 7:54pm |
I have the Fatal1ty X470 Gaming-ITX/ac with the 3400g and I am trying to do the Win 11 upgrade but as soon as I disable csm and reboot it goes to the start of bios and freezes. The only way I can boot back up is the reset button or holding the power button and then going into the bios and enabling csm again. I have the latest bios and I even tried setting to the default bios settings but it does the same thing. Does anyone know how I can get this to work right?
|
|
![]() |
|
threadzipper1957 ![]() Senior Member ![]() ![]() Joined: 05 Mar 2022 Status: Offline Points: 9365 |
![]() ![]() ![]() ![]() ![]() |
Hello,
Board and CPU are supported by Windows 11, but, there are some requirements, that have to be met, when doing an upgrade from Windows 10 to 11. 1. CSM has to be disabled 2. Windows 10 MUST be installed in GPT (UEFI) Mode 3. CPU fTPM must be enabled These are all the settings required. From what you write, it sounds like your Windows 10 is installed in MBR mode. There are 2 ways to solve this, the difficult one, and the easy one The difficult method, means you have to use a tool like mbr2gpt (from Microsoft) to convert the system into GPT mode. This can work, but sometimes, you just cannot get it fixed, and it takes a lot of time, to fix it, if you get it working at all. The easy method, means you have to make a backup of you important files, and do a clean installation of Windows 11 in GPT mode. Here are the steps 1. when using bitlocker first remove the encryption 2. google for the media creation tool and downlaod the latest Windows 11 ISO file, and let the tool create a USB stick for you 3. Reset the BIOS to default settings with F9 and only change the CSM setting to disabled, and enable the CPU fTPM 4. connect only the disk, you want Windows installed on 5.Boot the system, and use F11 to get into the boot menu, You should see the USB stick as a UEFI device, select this device to boot from, this will see to it, that Windows 11 is installed in GPT mode. Note, sometimes you have to run the boot procedure twice 6. select keyboard layout and language. 6, Select I don't have a license key, and agree to the terms and conditions Now select the same version as you had for Windows 10, so when you had Win 10 home, select Win 11 home. The activation for Windows 10, that is stored in the Microsoft cloud, will be used, to later activate Win 11, that is why it must be the same edition. Use a custom installation, and wipe all partitions from your boot drive And let Windows do the rest. Now the diference between Home and Pro. Windows 11 Home, can only be installed using a Microsoft (hotmail) account, this is a must. Windows 11 pro can also be installed using a local account (my favorite) After the installation, always first install the AMD chipset driver https://drivers.amd.com/drivers/amd_chipset_software_4.03.03.431.exe |
|
Kind Regards
|
|
![]() |
|
CptnSpaulding71 ![]() Newbie ![]() ![]() Joined: 08 Mar 2017 Location: USA Status: Offline Points: 75 |
![]() ![]() ![]() ![]() ![]() |
That's really annoying especially when I had no issues doing this with my X570 Taichi and a 5900x even though the install is done exactly the same way as mbr because I did a clean install on both so why does it work on one asrock board but not another?
|
|
![]() |
|
CptnSpaulding71 ![]() Newbie ![]() ![]() Joined: 08 Mar 2017 Location: USA Status: Offline Points: 75 |
![]() ![]() ![]() ![]() ![]() |
Nevermind that, I'm not sure why one install ended up mbr and the other gpt when I did them the same way as far as I thought so I will see what I can do. This secure boot garbage is a joke and I bet it disappears after the year is up for upgrading for free.
|
|
![]() |
|
voss749 ![]() Groupie ![]() Joined: 20 Jun 2020 Status: Offline Points: 434 |
![]() ![]() ![]() ![]() ![]() |
There is nothing wrong with your mobo as far as I know you need to turn csm back on and then run mbr2gpt from command line in recovery. See instructions in the link. I had the same issue.
https://docs.microsoft.com/en-us/windows/deployment/mbr-to-gpt You need to convert your boot drive to gpt. When its done then you can turn off csm and turn on secure boot and secure boot will work properly |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |