HyperV and Z690 Extreme

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello,

Brand new build with the following:

ASRock Z690 Extreme WiFi 6E Motherboard. (BIOS 6.03)
Intel i9-12900KS CPU
CORSAIR Vengeance RGB Pro 128GB (4 x 32GB) Model: CMW128GX4M4D3600C18
New Windows 10 Enterprise LTSC 2019 installation

After a fresh install, I enable HyperV and once I reboot the machine to finish the installation The system halts at the ASRock logo on my boot screen. Please help. Need to get HyperV working on this machine and the parts I've selected should work just fine.

Additional Notes:
- Keyboard and Mouse Halt as well. They have RGB and that goes out.
- Boot menu items in lower right corner disappear when it locks. Hand off problem?
- Power off required to get machine to attempt reboot.
- Running Windows recovery does nothing to solve issue.
- No CPU overclocking, at least I think there isn't, left everything auto.
- Memory is using XMP overclock, but had to turn it down to DDR-3400 because of stability issues.
--- Problem still presents even when left to Auto (2133) and no XMP
--- Side-Note, system unstable at default XMP settings with 3600 even though memory rated for 3600.
- Pretty sure I have all the right Virtualization options on in the BIOS, but open to someone making sure I have the right stuff on. Give me a list and I'll check it.

Thanks in Advance.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
HumbleSage Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 22 Apr 2022 Status: Offline Points: 70	Post Options Post Reply Quote HumbleSage Report Post Thanks(0) Quote Reply Topic: HyperV and Z690 Extreme Posted: 23 Apr 2022 at 11:41pm
	Hello, Brand new build with the following: ASRock Z690 Extreme WiFi 6E Motherboard. (BIOS 6.03) Intel i9-12900KS CPU CORSAIR Vengeance RGB Pro 128GB (4 x 32GB) Model: CMW128GX4M4D3600C18 New Windows 10 Enterprise LTSC 2019 installation After a fresh install, I enable HyperV and once I reboot the machine to finish the installation The system halts at the ASRock logo on my boot screen. Please help. Need to get HyperV working on this machine and the parts I've selected should work just fine. Additional Notes: - Keyboard and Mouse Halt as well. They have RGB and that goes out. - Boot menu items in lower right corner disappear when it locks. Hand off problem? - Power off required to get machine to attempt reboot. - Running Windows recovery does nothing to solve issue. - No CPU overclocking, at least I think there isn't, left everything auto. - Memory is using XMP overclock, but had to turn it down to DDR-3400 because of stability issues. --- Problem still presents even when left to Auto (2133) and no XMP --- Side-Note, system unstable at default XMP settings with 3600 even though memory rated for 3600. - Pretty sure I have all the right Virtualization options on in the BIOS, but open to someone making sure I have the right stuff on. Give me a list and I'll check it. Thanks in Advance.
	- HumbleSage :)

threadzipper1957 Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 05 Mar 2022 Status: Offline Points: 9245	Post Options Post Reply Quote threadzipper1957 Report Post Thanks(0) Quote Reply Posted: 09 Aug 2022 at 5:46pm
	After you installed Windows, did you frist install the INF chipset driver, this is really important. And was Windows itself running okay, and did the problem start, after you setup HyperV. Or use the support form https://tw.asrock.com/events/tsd.asp When using gmail, always check your spam folder for replies.
	Kind Regards

HumbleSage Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 22 Apr 2022 Status: Offline Points: 70	Post Options Post Reply Quote HumbleSage Report Post Thanks(0) Quote Reply Posted: 27 Aug 2022 at 7:52pm
	Yes and Yes.
	- HumbleSage :)