Kingston FURY Beast DDR5 |
Post Reply |
Author | |
WhiteFox
Newbie Joined: 15 Sep 2022 Status: Offline Points: 90 |
Post Options
Thanks(0)
Posted: 20 Sep 2022 at 11:42pm |
Thanks for that it was very helpful
|
|
threadzipper1957
Senior Member Joined: 05 Mar 2022 Status: Offline Points: 9365 |
Post Options
Thanks(0)
|
Basically any DDR5 should work, but besides Crucial and Samsung, most other manufacturers are only assemblers, who buy PCB's and chips from Samsung, Micron, Hynix, Elpida, Spectek, Nanya and others.
But there is a huge shortage of chips, meaning these assemblers buy anything they can lay their hands on, and solder that onto the PCB, which at itself is not a problem, but they keep reusing the partnumbers over and over, sometimes they have 512MB chips of brand A, next batch use 1GB chips of brand B, all sold under the same partnumber. in DDR3 time, Kingston was always working, in DDR4 time, I'd rather not recommend them, and had the best results with patriot Viper kits, who somehow, always worked. DDR5 is a new era. The memory controller is integrated in the CPU, it is NOT on the board,. and on the 12th gen CPU, is running optmal at 3200MHz with DDR4, and 4800MHz for DDR5 The sepcs underneath are copied from the Intel ARK website Up to DDR5 4800 MT/s Up to DDR4 3200 MT/s With DDr3, and DDR4, it didn't matter if you would overclock, above the speed of the internal memory controller, only a synthetic memory banchmark would show betetr results, but it would not do anything for the overall performance, that is really a hype. I don't know yet if DDR5 is any different, also XMP profiles, are overclocking for dummies, it should work with thousands of combinations of motherboards, CPU, and chipsets, AMD as well as Intel, but it is not guarranteed to work. Often people blame the motherboard, but it is the combination of CPU, chipset and memory, and fo course sometimes a BIOS update So you can try any brand, they all should work, as long as it is Non ECC, Unbuffered (desktop) memory. The QVL'son the website, is only what has been tested, it doesn't guarantee anything, since chips are constantly changing |
|
Kind Regards
|
|
WhiteFox
Newbie Joined: 15 Sep 2022 Status: Offline Points: 90 |
Post Options
Thanks(0)
|
HI
I'm just about to build my 1st Pc, I'd like to use a ASRock Z690 TAICHI as my Mobo, would I be ok to use Kingston FURY Beast DDR5 32GB 5600MT/s DDR5 with this board, I think It should be ok but just wanted to check it compatible.https://forum.asrock.com/smileys/smiley2.gif Thanks In Advance |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |