Fatal1ty AB350 mini-itx : issues at cold start

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi,

I've a Fatal1ty AB350 mini-itx motherboard with a Ryzen 5 5600G (previously had a 2200G and had the same issue).

I'm running on BIOS 7.40 and use 16GB RAM.

What I observed is that although my RAM is 2666 MHz, it's only recognized as 2133 by default. So if I change the frequency in the BIOS, it works fine.

I can restart the computer or shut it down and start it up again and the setting will be kept until I do not turn the PSU switch to OFF.

If I do so, wait let's say 30s, and and then turn it on and do a cold start, I'll have 2 issues :
1. The system will take at least 30s to reach to the first ASRock logo.
2. The RAM frequency setting is lost and I've to set it again.

Some other BIOS settings are well saved (ex : the priority order for my SSD's).

I created a ticket but until now, I've not received any news yet.
I could see that others here and on other forums have experienced cold boot issues too (slow start).

Anyone could get this solved ? Or shall we hope it'll be fixed in a next BIOS revision ?

Best,
K.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Kid_E Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 06 Jan 2023 Status: Offline Points: 160	Post Options Post Reply Quote Kid_E Report Post Thanks(0) Quote Reply Posted: 06 Jan 2023 at 8:31pm
	Hi, I've a Fatal1ty AB350 mini-itx motherboard with a Ryzen 5 5600G (previously had a 2200G and had the same issue). I'm running on BIOS 7.40 and use 16GB RAM. What I observed is that although my RAM is 2666 MHz, it's only recognized as 2133 by default. So if I change the frequency in the BIOS, it works fine. I can restart the computer or shut it down and start it up again and the setting will be kept until I do not turn the PSU switch to OFF. If I do so, wait let's say 30s, and and then turn it on and do a cold start, I'll have 2 issues : 1. The system will take at least 30s to reach to the first ASRock logo. 2. The RAM frequency setting is lost and I've to set it again. Some other BIOS settings are well saved (ex : the priority order for my SSD's). I created a ticket but until now, I've not received any news yet. I could see that others here and on other forums have experienced cold boot issues too (slow start). Anyone could get this solved ? Or shall we hope it'll be fixed in a next BIOS revision ? Best, K.