![]() |
x670e Taichi can't run stable with ACPI C-States |
Post Reply ![]() |
Page <123> |
Author | |
Katana1074 ![]() Senior Member ![]() Joined: 31 Dec 2022 Status: Offline Points: 1325 |
![]() ![]() ![]() ![]() ![]() |
looking at those logs it seems memory related,what is your current memory speed with 1 dimm ?
|
|
![]() |
|
EEPS ![]() Groupie ![]() Joined: 30 Dec 2022 Location: California Status: Offline Points: 280 |
![]() ![]() ![]() ![]() ![]() |
There are a bunch of errors in the logs, but the two "BugCheck" (BSOD) ones I see are:
Log Name: System Source: Microsoft-Windows-WER-SystemErrorReporting Date: 1/21/2023 8:35:21 AM Event ID: 1001 Task Category: None Level: Error Keywords: User: SYSTEM Computer: radagast Description: The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 (0xffffd80a8effd008, 0x0000000000000002, 0xfffff802b0616dbf, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: a14e3847-9b4f-4658-8265-d63d50f3c938. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{abce23e7-de45-4366-8631-84fa6c525952}" /> <EventID>1001</EventID> <Version>1</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000000</Keywords> <TimeCreated SystemTime="2023-01-21T16:35:21.9042473Z" /> <EventRecordID>621</EventRecordID> <Correlation /> <Execution ProcessID="1360" ThreadID="1364" /> <Channel>System</Channel> <Computer>radagast</Computer> <Security UserID="S-1-5-18" /> </System> <EventData> <Data Name="param1">0x00000050 (0xffffd80a8effd008, 0x0000000000000002, 0xfffff802b0616dbf, 0x0000000000000000)</Data> <Data Name="param2">C:\Windows\MEMORY.DMP</Data> <Data Name="param3">a14e3847-9b4f-4658-8265-d63d50f3c938</Data> </EventData> </Event> and: Log Name: System Source: Microsoft-Windows-WER-SystemErrorReporting Date: 1/21/2023 11:52:52 AM Event ID: 1001 Task Category: None Level: Error Keywords: User: SYSTEM Computer: radagast Description: The computer has rebooted from a bugcheck. The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff8003e2adec6, 0xfffff2048ceb8030, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 630ae38e-a642-4a45-a028-c914cee89460. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{abce23e7-de45-4366-8631-84fa6c525952}" /> <EventID>1001</EventID> <Version>1</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000000</Keywords> <TimeCreated SystemTime="2023-01-21T19:52:52.8359433Z" /> <EventRecordID>2242</EventRecordID> <Correlation /> <Execution ProcessID="1380" ThreadID="1384" /> <Channel>System</Channel> <Computer>radagast</Computer> <Security UserID="S-1-5-18" /> </System> <EventData> <Data Name="param1">0x0000003b (0x00000000c0000005, 0xfffff8003e2adec6, 0xfffff2048ceb8030, 0x0000000000000000)</Data> <Data Name="param2">C:\Windows\MEMORY.DMP</Data> <Data Name="param3">630ae38e-a642-4a45-a028-c914cee89460</Data> </EventData> </Event> |
|
![]() |
|
EEPS ![]() Groupie ![]() Joined: 30 Dec 2022 Location: California Status: Offline Points: 280 |
![]() ![]() ![]() ![]() ![]() |
Now another SYSTEM_SERVICE_EXCEPTION then KMOD_EXCEPTION_NOT_HANDLED so can't even get into windows hardly now without BSOD and eventually will corrupt the drive like last time... So I will try to disable C-State stuff again to see if I can just get in long enough to get logs. Anyway at this point I am contemplating buying the cheapest 7000 processor (7600) and dropping it in just to see if it is the CPU or MoBo.
|
|
![]() |
|
EEPS ![]() Groupie ![]() Joined: 30 Dec 2022 Location: California Status: Offline Points: 280 |
![]() ![]() ![]() ![]() ![]() |
Just reinstalled windows with a single stick of RAM in B2 slot and removed my GFX card and just using the integrated for now and everything seemed fine, but then after installing updates and rebooting I got a BSOD with SYSTEM_SERVICE_EXCEPTION. Then after it restarted I thought I should install amd adrenalin driver in case its a driver issue, but I got an "Oops! Something went wrong" during the install.. so no I don't think it is stable even with one stick ram.
|
|
![]() |
|
Katana1074 ![]() Senior Member ![]() Joined: 31 Dec 2022 Status: Offline Points: 1325 |
![]() ![]() ![]() ![]() ![]() |
as an after thought,4 sticks of ram is very hard on the memory controller....
|
|
![]() |
|
Katana1074 ![]() Senior Member ![]() Joined: 31 Dec 2022 Status: Offline Points: 1325 |
![]() ![]() ![]() ![]() ![]() |
this tells me that its not c-states that is the issue there is something else going on...
Try disabling the igpu and any other controllers you might not need in bios try with only 1 ram stick inserted.... |
|
![]() |
|
EEPS ![]() Groupie ![]() Joined: 30 Dec 2022 Location: California Status: Offline Points: 280 |
![]() ![]() ![]() ![]() ![]() |
Now I don't know what is going on, I can't even make it through the Windows 11 setup process, it randomly reboots. It installed successfully, but when asking for my info it just reboots. This is in my "stable" config with c-states disabled... so maybe not so stable after all. I do have all 4 sticks of ram in. I may try with just one, then maybe reseat my CPU I guess... not sure what else to try.
|
|
![]() |
|
EEPS ![]() Groupie ![]() Joined: 30 Dec 2022 Location: California Status: Offline Points: 280 |
![]() ![]() ![]() ![]() ![]() |
Thanks, no I have a 7900 XT.
|
|
![]() |
|
Katana1074 ![]() Senior Member ![]() Joined: 31 Dec 2022 Status: Offline Points: 1325 |
![]() ![]() ![]() ![]() ![]() |
Hi there...
In Windows Right Click start menu and select event viewer the select Administrative events look for errors and warnings post back here.... You wouldnt be by chance running the integrated Gpu and another graphics card ie rtx3090 i had no end of bother till i disabled the processor gpu... Regards |
|
![]() |
|
EEPS ![]() Groupie ![]() Joined: 30 Dec 2022 Location: California Status: Offline Points: 280 |
![]() ![]() ![]() ![]() ![]() |
Which logs and how do I get them? I have seen many BSODs, most seem to do with memory access violations. In linux I see segfaults and kernel memory access violation. Right now I have to reinstall windows because it appears to be corrupted after testing and the start menu no longer appe. I will do that and see what logs I can get.
|
|
![]() |
Post Reply ![]() |
Page <123> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |