NVIDIA QUADRO & Creator 2.0

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I think I solved the problem. The manual suggests a single cared should go into the PCIE2 slot. I had tried this with no luck. In the BIOS settings I went to that slot and set the speed to Gen 2 and the card is now functioning. Now to see if there are Windows 11 drivers for this older card...

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Klankster Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 08 Jul 2023 Status: Offline Points: 35	Post Options Post Reply Quote Klankster Report Post Thanks(0) Quote Reply Topic: NVIDIA QUADRO & Creator 2.0 Posted: 08 Jul 2023 at 2:35am
	I think I solved the problem. The manual suggests a single cared should go into the PCIE2 slot. I had tried this with no luck. In the BIOS settings I went to that slot and set the speed to Gen 2 and the card is now functioning. Now to see if there are Windows 11 drivers for this older card...

Klankster Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 08 Jul 2023 Status: Offline Points: 35	Post Options Post Reply Quote Klankster Report Post Thanks(0) Quote Reply Posted: 08 Jul 2023 at 2:03am
	I just set up a new ASRock Creator 2.0 with an AMD Threadripper Pro. Works fine EXCEPT that it can't seem to find/use either an NVIDIA QUADRO K4000 or QUADRO FX 3800. I know the FX 3800 works because it was working in this box before I upgraded the motherboard. I've tried both cards in several PCIe slots with no luck. Only the motherboard's built-in 15-pin display output works. Are these cards incompatible? Both are PCI Express 2.0 x16; shouldn't the PCIe4.0 slots support this? I was considering switching the built-in display adapter support off (it's set to AUTO now) to see if that would let it find one of these cards but that shouldn't be necessary. Thoughts? Thanks.