X670E PG Lightning no post |
Post Reply |
Author | |
Thirdhero
Newbie Joined: 15 Sep 2023 Status: Offline Points: 20 |
Post Options
Thanks(0)
Posted: 15 Sep 2023 at 4:30pm |
So I just received my x670e PG Lightning and I installed it in my system with a 7900x and some Gskill flare X5 F5-6000J3636F16GX2-FX5
2 sticks of 32GB Expo memory. I am trying to start my PC fans come on full speed and Dram and CPU lights are on solid red. I have reseated my CPU and reseated my ram and tried individual sticks installed according to the manual. I only plugged in the 4+4 ATX12V1 connector the V2 is not connected as the manual mentioned it was optional. Still cannot get it booted I checked, double and triple checked all the connections. I am honestly a bit stumped on what to do right now so any help would be appreciated |
|
ASRock_TSD
ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8727 |
Post Options
Thanks(0)
|
Dear Thirdhero,
Thank you for the posting. For this case, please kindly refer to the following suggestions to see if the system can post. 1. Please refer to the user manual on page 6 No.26 and page 35 to try clear CMOS. User manual: https://download.asrock.com/Manual/X670E%20PG%20Lightning.pdf 2. Please install only one memory module on the slot B2. 3. Repeat step 2 and install the memory module in other slots and try. 4. Please make sure memory module is installed properly, we recommend using both hands to install the module firmly. 5. Please install only the CPU, CPU cooler, one memory module (slot B2) and keyboard on the system to check if the system can POST. (Remove other devices such as the USB devices and SSD) 6. Please re-plug the power supply cable. 7. Please reinstall the CPU to try. Also make sure the CPU socket is not pin bent. 8. If possible, please try with another CPU, memory module, and power supply. Thank you Yours truly, ASRock TSD |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24518 |
Post Options
Thanks(0)
|
Try powering up the system and leaving it powered up for 10mins or so. Sometimes
the first POST can take an insanely long time. It seems to be particularly common with AM5. |
|
|
|
rouki999
Newbie Joined: 28 Nov 2022 Status: Offline Points: 145 |
Post Options
Thanks(0)
|
I have the same issue with my X670E RS.
My System is a 7950x with 2x 32 GB Ram (F5-5600J3036D32GX2-TZ5RK). The system is running fine and sometimes the BIOS is hanging in the POST. It only helps to reset the BIOS! After reset from the BIOS the system is booting again. Then you have to set your BIOS settings again. If I switch to the XMP profile from the DRAM. It takes minutes to boot the first time with this settings. You don´t know is the BIOS hanging again or is it doing something. You have no screen or something else. Only the CPU and DRAM LED is red. I think there big problems in the BIOS! I don´t know what the problem is, but I can say, I will not buy a Asrock Mainboard again. The BIOS is one the worst in compare to the others supplier for AMD. It takes much longer to get a new stable BIOS version in compare to the others. Only the price is better, but in form of stability and fast support, then I will pay a couple of ??more for that. |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |