ASRock BIOS sees my XPG Gammix S70 Blade but canno

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

Hi all,

I have been driving myself crazy trying to get my brand new build up and running and was hoping you could help. 

Here?�s my part list:?� https://uk.pcpartpicker.com/list/Y6qgn6

I have installed a M2 XPG Gammix Blade 2TB onto my ASrock Steel Legend 760M Wifi motherboard, there are no other drives. When I go into the BIOS settings I can see it listed in the storage configuration section of EZMode but it is not listed on the right hand side in the Boot Priority list. (I?�ve attached some images)

https://imgur.com/a/rDZ3WjY

I have tried it on M2_1 slot and M2_3 slot, same result with both
I have updated my BIOS to version 6.07 (from the V2.08 that it came out of the box with)
I have tried correcting my BIOS RAM settings to the correct XMP profile (it was defaulting to 4000mhz in AUTO, profile 1 recognised the correct speed. 

When I load up the windows installer I get ?�A media driver your computer needs is missing. Etc??and it cannot see the M2 drive, just the boot drive of my installer. 

When I go to the command prompt and enter diskpart I can see it as disk 0

One major potential issue is, looking at this supported storage page:??
https://www.asrock.com/MB/Intel/B760M%20Steel%20Legend%20WiFi/index.us.asp#Storage

I do not see a 2TB version of the S70 supported, it only mentions 1TB. Could it be as simple as that? My drive has too much space for it to recognise it? I?�m waiting for the 1TB to be delivered so I can test but I want to believe that this is fixable as I?�d like my 2TB drive please. 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
rupertvdb Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 06 Nov 2023 Status: Offline Points: 20	Post Options Post Reply Quote rupertvdb Report Post Thanks(0) Quote Reply Topic: ASRock BIOS sees my XPG Gammix S70 Blade but canno Posted: 06 Nov 2023 at 5:40pm
	Hi all, I have been driving myself crazy trying to get my brand new build up and running and was hoping you could help. Here?�s my part list:?� https://uk.pcpartpicker.com/list/Y6qgn6 I have installed a M2 XPG Gammix Blade 2TB onto my ASrock Steel Legend 760M Wifi motherboard, there are no other drives. When I go into the BIOS settings I can see it listed in the storage configuration section of EZMode but it is not listed on the right hand side in the Boot Priority list. (I?�ve attached some images) https://imgur.com/a/rDZ3WjY I have tried it on M2_1 slot and M2_3 slot, same result with both I have updated my BIOS to version 6.07 (from the V2.08 that it came out of the box with) I have tried correcting my BIOS RAM settings to the correct XMP profile (it was defaulting to 4000mhz in AUTO, profile 1 recognised the correct speed. When I load up the windows installer I get ?�A media driver your computer needs is missing. Etc??and it cannot see the M2 drive, just the boot drive of my installer. When I go to the command prompt and enter diskpart I can see it as disk 0 One major potential issue is, looking at this supported storage page:?? https://www.asrock.com/MB/Intel/B760M%20Steel%20Legend%20WiFi/index.us.asp#Storage I do not see a 2TB version of the S70 supported, it only mentions 1TB. Could it be as simple as that? My drive has too much space for it to recognise it? I?�m waiting for the 1TB to be delivered so I can test but I want to believe that this is fixable as I?�d like my 2TB drive please.