(AM1H-ITX) Slow boot with SSD

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I have 2 identical  builds using AM1H-ITX boards:
AM1H-ITX
AMD Athalon 5350
Samsung EVO 840 - 250 GB SSD
Corsair Vengence DDR3 1600 - 16 GB (2x 8 GB)
Windows 7 pro 64-bit

All drivers downloaded and installed off the website, device manager shows no issues.  ACHI enabled prior to windows install

Machine takes a long time to boot.  from power on to windows desktop is 35-45 seconds.  much longer then id expect from a SSD.  

Tried a fresh windows install on one of the builds, set boot to 'fast', didnt have any effect.

Checked to see if the drive was connected to a SATA II port, but according to the manual all 4 ports are SATA III

Not really sure where to start with this one.  any help would be greatly appreciated

Edited by jamaster14 - 20 Jun 2015 at 2:30pm

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
jamaster14 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 20 Jun 2015 Status: Offline Points: 11	Post Options Post Reply Quote jamaster14 Report Post Thanks(0) Quote Reply Posted: 20 Jun 2015 at 2:23pm
	I have 2 identical builds using AM1H-ITX boards: AM1H-ITX AMD Athalon 5350 Samsung EVO 840 - 250 GB SSD Corsair Vengence DDR3 1600 - 16 GB (2x 8 GB) Windows 7 pro 64-bit All drivers downloaded and installed off the website, device manager shows no issues. ACHI enabled prior to windows install Machine takes a long time to boot. from power on to windows desktop is 35-45 seconds. much longer then id expect from a SSD. Tried a fresh windows install on one of the builds, set boot to 'fast', didnt have any effect. Checked to see if the drive was connected to a SATA II port, but according to the manual all 4 ports are SATA III Not really sure where to start with this one. any help would be greatly appreciated Edited by jamaster14 - 20 Jun 2015 at 2:30pm