Taichi X670E AIO Headers£

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I just installed an EK Nucleus 360 Dark in my Taichi X670E with AMD 7900X CPU.  The EK manual says to use CPU headers when possible (I assume to allow for pump and fan control more easily, but I'm not positive.)

The Taichi manual says my options are: 
*** CPU_FAN1 supports the fan power up to 1A (12W).
**** CPU_FAN2/WP_3A supports the fan power up to 3A
(36W).
***** CHA_FAN1~6/WP support the fan power up to 2A (24W).
***** CPU_FAN2/WP_3A and CHA_FAN1~6/WP can auto
detect if 3-pin or 4-pin fan is in use.

Given the power output of each header, which one should I use for the pump to run 100%, and which header should I use for the daisy-chained fans?

Thanks for your help!

o&f

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
oldandfat Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 02 Feb 2024 Status: Offline Points: 20	Post Options Post Reply Quote oldandfat Report Post Thanks(0) Quote Reply Topic: Taichi X670E AIO Headers£ Posted: 02 Feb 2024 at 3:56pm
	I just installed an EK Nucleus 360 Dark in my Taichi X670E with AMD 7900X CPU. The EK manual says to use CPU headers when possible (I assume to allow for pump and fan control more easily, but I'm not positive.) The Taichi manual says my options are: * CPU_FAN1 supports the fan power up to 1A (12W). CPU_FAN2/WP_3A supports the fan power up to 3A (36W). * CHA_FAN1~6/WP support the fan power up to 2A (24W). *** CPU_FAN2/WP_3A and CHA_FAN1~6/WP can auto detect if 3-pin or 4-pin fan is in use. Given the power output of each header, which one should I use for the pump to run 100%, and which header should I use for the daisy-chained fans? Thanks for your help! o&f