ASRock Z490 PG Velocita Memory and CPU problem

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello,

This is a long story, but i trying to make it short.

3 year ago, I bought the mb in the subject, along with an I5 10600KF and a set of 16GB 3200Mhz RAM from G.Skill. When I used this setup, I noticed that the CPU was not overclocking automatically. Then I saw that it was running at a fixed clock speed, which was 4.5 Ghz. In Idle to.

I sold the parts of it soon after and only the board is left of it.

A few days ago I got some new parts for it from a friend. Namely a 11600KF and a DDR4 Corsair 32GB 3600 MHz CMW32GX4M2D3600C18.

After assembling the PC, I was unable to set the XMP profile of the memory, even though the settings are displayed in the XMP profile 1 under the "Memory Information" tab.

Also, with the new processor it gave the same error as with the old one.

Is it possible that I'm the only one who is very clumsy and has some configuration problem? Have you encountered this before?

Thanks in advance for your reply and help!

P.S. Sorry for my English, it's not my native language.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
GregorioBlastkovich Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 14 Feb 2024 Location: Hungary Status: Offline Points: 20	Post Options Post Reply Quote GregorioBlastkovich Report Post Thanks(0) Quote Reply Topic: ASRock Z490 PG Velocita Memory and CPU problem Posted: 14 Feb 2024 at 6:49pm
	Hello, This is a long story, but i trying to make it short. 3 year ago, I bought the mb in the subject, along with an I5 10600KF and a set of 16GB 3200Mhz RAM from G.Skill. When I used this setup, I noticed that the CPU was not overclocking automatically. Then I saw that it was running at a fixed clock speed, which was 4.5 Ghz. In Idle to. I sold the parts of it soon after and only the board is left of it. A few days ago I got some new parts for it from a friend. Namely a 11600KF and a DDR4 Corsair 32GB 3600 MHz CMW32GX4M2D3600C18. After assembling the PC, I was unable to set the XMP profile of the memory, even though the settings are displayed in the XMP profile 1 under the "Memory Information" tab. Also, with the new processor it gave the same error as with the old one. Is it possible that I'm the only one who is very clumsy and has some configuration problem? Have you encountered this before? Thanks in advance for your reply and help! P.S. Sorry for my English, it's not my native language.