ASRock Extreme 3 AM3+ No POST, No beeps |
Post Reply |
Author | |
fuse01
Newbie Joined: 07 Jul 2015 Status: Offline Points: 6 |
Post Options
Thanks(0)
Posted: 07 Jul 2015 at 10:31pm |
Hi, my pc was working fine until I awoke this morning to it totally frozen and unresponsive with no other option I held down the power button and powered down but now when i power it up It does nothing apart from light up and spin fans and the only way it will power off again is to hold down the power button. Ive tried resetting the Bios by removing the Cmos battery for over 30 secs and also tried with the jumper too but still no change, no start up screen and no beeps even with just my cpu connected I still don't get any beeps, I have a speaker connected to my mobo and it has beeped many times before when hardware was missing etc so i'm at a loss as to what to try next, Any help is much appreciated and thanks in advance
|
|
ASRock Extreme 3 AM3+
CPU: FX4100 3.6ghz GPU: HD7850 2gb RAM: Corsair XMS3 4gb 1333mhz |
|
fuse01
Newbie Joined: 07 Jul 2015 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
*970 Extreme 3 AM3+
|
|
ASRock Extreme 3 AM3+
CPU: FX4100 3.6ghz GPU: HD7850 2gb RAM: Corsair XMS3 4gb 1333mhz |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24713 |
Post Options
Thanks(0)
|
The most common cause of this kind of problem is the power supply, thats where I would start looking. If you have a spare PSU see if it will power up the system.
|
|
fuse01
Newbie Joined: 07 Jul 2015 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
I literally just installed a brand new 520w PSU so im sure that's not the cause
|
|
ASRock Extreme 3 AM3+
CPU: FX4100 3.6ghz GPU: HD7850 2gb RAM: Corsair XMS3 4gb 1333mhz |
|
fuse01
Newbie Joined: 07 Jul 2015 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
it' just a nightmare one second it's posting next it's doing nothing, the furthest i got with it was it gettting to the initial ASRock start up screen but then it's stuck on that screen and hasnt detected the keyboard so can't get into bios or boot congfig then next second it's not even posting or beeping with out any changes made, driving me crazy, the problem is so temperamental that it's seems impossible to find the cause unless it's the mobo, im sat here at the moment just using that whole rig to power my gpu that is in my back up pre-built pc as that doesn't have the power for it
|
|
ASRock Extreme 3 AM3+
CPU: FX4100 3.6ghz GPU: HD7850 2gb RAM: Corsair XMS3 4gb 1333mhz |
|
odiebugs
Newbie Joined: 07 Jul 2015 Status: Offline Points: 193 |
Post Options
Thanks(0)
|
Without looking at what you have, remove all memory but leave one stick, does it have a IGPU, you know onboard graphics, try it, you want to remove all, and only try and run one stick memory and one port or card for graphics.
Sorry, you don't have IGPU, do you have another card, reseat GPU and check pins. Like you were building it new. Now when you do this, remove the 8pin CPU power and the 20 24 pin, check the pins for overheating and check the board for any signs of overheated plastic. You want to see if you can enter BIOS and default it all out and then reset it, then adding componets back to look at which one causes the issue. Also, Xaltar is correct. I just talked to someone who spent 400.00 on one of the top corsair 1200w PSU and it went bad in a day. If you look at PSU MFG's, they have DOA, died, all the time. I have tested PSU's that show correct voltage on each rail but when asked to supply they couldn't. Drawing power. Motherboards are not infallible, but we hope your board is ok. I'm sure you know to remove the charge from the PSU and motherboard before you do anything, but we should say it to make sure. Edited by odiebugs - 20 Jul 2015 at 3:41am |
|
asrocking
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |