![]() |
Underclock i7-6700k to use in a Deskmini 110 |
Post Reply ![]() |
Page <12 |
Author | |
parsec ![]() Moderator Group ![]() ![]() Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
![]() ![]() ![]() ![]() ![]() |
I think it is worth changing from the Intel stock fan. Intel does not include a stock CPU cooler with the 'K' processors. What CPU cooler brands are available to you? The small Noctua coolers like the NH-L9i will work with this board. You must be very careful that the CPU cooler is no more than 95mm x 95mm wide, and not more than 55mm high, including its fan. Otherwise the CPU cooler will not fit in the board, or the mother board tray will not fit in the case if the CPU cooler is too high. You cannot take the top off of the case, it is one piece. The ThermalTake Slim x3 I use is 92mm x 99mm, but it will fit if it is mounted so the longer side is turned away from the heat sink for the voltage regulators. It also depends on the mounting system of the CPU cooler if it will fit if it is a little larger than 95mm x 95mm. Don't just buy one that you think will fit, you really must be sure it will fit. |
|
![]() |
|
raphael ![]() Newbie ![]() Joined: 14 Dec 2016 Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() |
I will try to fit a SilverStone Argon AR05 in my build : http://www.ldlc.com/fiche/PB00220971.html Its size is : 36,7 x 104 x 92 mm I hope it will fit. The other models of ventirad you mentioned are not very well distributed in Europe. |
|
![]() |
|
raphael ![]() Newbie ![]() Joined: 14 Dec 2016 Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() |
Other options :
DeepCool HTPC-200 (47 x 97,5 x 90) http://www.ldlc.com/fiche/PB00196832.html SilverStone Nitrogon NT09-115X (45 x 96 x 96 ) http://www.ldlc.com/fiche/PB00204015.html Akasa AK-CCE-7102CP ( 95 x 95 x 53 mm ) http://www.ldlc.com/fiche/PB00205596.html Thoughts ? Edited by raphael - 01 Jan 2017 at 2:59am |
|
![]() |
|
alvinkiang ![]() Newbie ![]() Joined: 07 Jan 2017 Status: Offline Points: 4 |
![]() ![]() ![]() ![]() ![]() |
![]() |
|
parsec ![]() Moderator Group ![]() ![]() Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
![]() ![]() ![]() ![]() ![]() |
Yes, I am sure that is a mistake. There is no reason any processor with a TDP greater than 65W should be included in the CPU Support List of the DeskMini, of the H110M-STX mother board. |
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 23963 |
![]() ![]() ![]() ![]() ![]() |
I wasn't sure but I suspected as much too. Given the site has recently been overhauled (it looks and works great now) it must have somehow slipped in there by mistake with all the other work going on.
|
|
![]() |
|
![]() |
|
keeepc ![]() Newbie ![]() Joined: 26 Jan 2017 Status: Offline Points: 2 |
![]() ![]() ![]() ![]() ![]() |
Hello everyone,
I have this machine, to cool it well, I installed a dynatron K129 and a noctua A9x14, 27 of height for the dynatron and 14mm for the noctua for a total of 41mm all internally. I added an external 90mm bequiet .... http://www.hostingpics.net/album/keeepc-285148.html I think, except the power of the power, you can fit a cpu "K"labeled, and cool it properly with double fans ...... Edited by keeepc - 26 Jan 2017 at 5:55am |
|
![]() |
|
keeepc ![]() Newbie ![]() Joined: 26 Jan 2017 Status: Offline Points: 2 |
![]() ![]() ![]() ![]() ![]() |
![]() |
Post Reply ![]() |
Page <12 |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |