Ram Problem with 870icafe? |
Post Reply |
Author | |
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Online Points: 24653 |
Post Options
Thanks(0)
Posted: 11 Jul 2015 at 3:24am |
Try clearing CMOS either via the jumpers or by the battery removal method. Also check the RAM slots for dirt/dust I have seen dust cause all kinds of havok with PCs. If they are clogged you can use a toothbrush dipped in isopropyl alcohol to clean them out. Be sure to wait until all the alcohol is evaporated before seating the RAM again.
I hope this helps
|
|
ramin_rp
Newbie Joined: 09 Jul 2015 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
I tried all four RAMs in different combination, when i use B1 slot debugger shows 63 and when use B2
debugger shows 65. It seems the problem is the motherboard. How can I make sure? Edited by ramin_rp - 11 Jul 2015 at 12:19am |
|
odiebugs
Newbie Joined: 07 Jul 2015 Status: Offline Points: 193 |
Post Options
Thanks(0)
|
Can you try each single stick, and are you sure it's not D3 and D5 ?
What happens with 4 sticks ? Can you mark each stick with small piece tape so you can know each one, then try the A1 and B1 with different sticks until you try all four in different combination ? Sorry, trying to see if it's memory or channels.
Edited by odiebugs - 10 Jul 2015 at 6:56am |
|
asrocking
|
|
ramin_rp
Newbie Joined: 09 Jul 2015 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Thank you,
Yes , I have 4 RAMs,They are KingMax 2GB 1333, This system worked correctly for 4 years, I was recently faced with this problem. |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Online Points: 24653 |
Post Options
Thanks(1)
|
Welcome to the forums
It sounds like the RAM is refusing to operate in dual channel for some reason. Are both RAM modules the same brand/model and size? Most systems do not like mixed brands and capacities in dual channel.
|
|
ramin_rp
Newbie Joined: 09 Jul 2015 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
hi,
I have a 870icafe motherboard, when install RAM to A1 and B1 blue slots debugger show wink 63 and system not boot . when remove Ram from B1 slot system work correctly. And when install Ram to A2 and B2 white slots debugger shows 65 and system not boot. what is my motherboard problem and how can i fix it? |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |