RMA? No BIOS LEDs/POST

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

X99M/3.1-BIOS 1.0 
I guess I should have flashed to the available v1.1 before I tried to overclock, I was too optimistic with my settings and when I rebooted I get a constantly-ON(!) black screen monitor signal.

There are no LEDs on the motherboard that are lit. Neither BIOS_A or BIOS_B LED shows up and the red BIOS_A was on when it was working. Tried switching to B already.

I happen to have LEDs on my RAM and they are lit, but no DR.debug or other signs of life from the motherboard(I noticed the beep is off by default after a CMOSclear, so that won't help if it was just the monitor)

I tried the clear CMOS button and jumper to no effect.

Before I try taking out the RAM to see if there are beeps and/or trying a different video card, can someone tell me if no LEDs means I killed it just by raising the voltage adjustments in the UEFI?

Edited by 30GHz - 20 Jul 2015 at 2:02pm

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
30GHz Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 20 Jul 2015 Status: Offline Points: 13	Post Options Post Reply Quote 30GHz Report Post Thanks(0) Quote Reply Posted: 20 Jul 2015 at 11:15am
	X99M/3.1-BIOS 1.0 I guess I should have flashed to the available v1.1 before I tried to overclock, I was too optimistic with my settings and when I rebooted I get a constantly-ON(!) black screen monitor signal. There are no LEDs on the motherboard that are lit. Neither BIOS_A or BIOS_B LED shows up and the red BIOS_A was on when it was working. Tried switching to B already. I happen to have LEDs on my RAM and they are lit, but no DR.debug or other signs of life from the motherboard(I noticed the beep is off by default after a CMOSclear, so that won't help if it was just the monitor) I tried the clear CMOS button and jumper to no effect. Before I try taking out the RAM to see if there are beeps and/or trying a different video card, can someone tell me if no LEDs means I killed it just by raising the voltage adjustments in the UEFI? Edited by 30GHz - 20 Jul 2015 at 2:02pm