|
Fatal1ty AB350 Gaming K4, W10 critical error ID 41 |
Post Reply 
|
| Author | |
Azi0 
Newbie 
Joined: 15 Apr 2017 Status: Offline Points: 5 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Fatal1ty AB350 Gaming K4, W10 critical error ID 41Posted: 15 Apr 2017 at 2:32pm |
|
Hello everyone,
besides the RAM not going at full speed I have a different kinda major issue. And it is critical error ID 41 in windows 10. I have everything set at default / auto - for cpu/gpu/ram. How do i get such a error? - for eg. if I run Fire strike and the blue one falls at it's back on the bridge. What have i checked? Well basically I replaced every pc part, except the ram. RMAed it all and bought anew. MOBO BIOS 2.22. Tryed to use different cables psu-vga; vga in different pcie, vga fans set at max speed. Used clean installation of W10. Power profile tested with AMD's balanced and with high performance. RAM I benchmarked it with each stick in all possitions, then together, swaped it in all combinations. Back then on previous pc rig (3weeks ago) I tested RAM in memtest - 6 passes took about 24hours - with no errors. Components are on a table, not in pc case. Currently testing memtest again - will let it go for 8 full passes. PC components: R7 1700 was -> now R5 1600 Fatal1ty AB350 Gaming K4 ASUS Radeon RX 480 dual-rx480-O8G Corsair vengeance lpx 2x8GB 3200MHz (DS) CMK16GX4M2B3200C16 SSD: Adata SP920 (from older ntb; new instalation of W10) HDD: travelstart 7k1000 Anybody had same issue?  |
|
 |
|
|
Azi0
Newbie
Joined: 15 Apr 2017 Status: Offline Points: 5 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Apr 2017 at 2:47am |
|
Just to let you all know...
It seems that I do not have these problems anymore after I changed GPU. + Iam able to run my hynix RAM at 2933MHz BIOS settings: XMP 2.0 profile 1 DRAM frequency 2933 cas (tcL) 16 ras (tRCDRD) 18 ras (tRCDWR) 18 row (tRP) 18 ras (tRAS) 36 All on auto, but DRAM Voltage at 1.35 |
|
|
|
|
wardog
Moderator Group 
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Apr 2017 at 11:28am |
|
FYI, as it's running, but....... Error 41's are usually caused by outdated drivers.
|
|
|
|
|
Azi0
Newbie
Joined: 15 Apr 2017 Status: Offline Points: 5 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Apr 2017 at 9:57pm |
|
Drivers were all newest
|
|
|
|
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Apr 2017 at 10:17pm |
|
|
|
parsec
Moderator Group
Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Apr 2017 at 10:40pm |
|
Was the first video card bad, did you use it in another PC before putting it in your Ryzen PC?
Windows 10 likes to update drivers, and will do it automatically. If you have your network connected to the PC just after you install Windows 10, Windows will install drivers before we can, and not just the Windows 10 built in drivers. Also, are new drivers always perfect? Plus which driver was the problem, for the video card or something else? |
|
|
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
Azi0 wrote: