ASRock.com Homepage
Forum Home Forum Home > Technical Support > AMD Motherboards
  New Posts New Posts RSS Feed - X370 Killer SLI Problem
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

X370 Killer SLI Problem
 Post Reply Post Reply Page  <12
Author
Message Reverse Sort Order
  Topic Search Topic Search  Topic Options Topic Options
scjconsulting View Drop Down
Newbie
Newbie


Joined: 04 Apr 2017
Location: Minnesota
Status: Offline
Points: 57 		Post Options Post Options   Thanks (0) Thanks(0)   Quote scjconsulting Quote  Post ReplyReply Direct Link To This Post Posted: 28 May 2017 at 12:29pm
Originally posted by scjconsulting scjconsulting wrote:


I purchased a bare system from CyberPowerPC, with a cheap graphic card and just a 1 TB disk.  It booted up on Windows 10, without a license because I had ordered it without an OS. I then swapped in a EVGA 1080 graphics card and that worked fine.  I then pulled the disk out, put in a 500GB SSD as SATA3_1, 2 2TB hard drives as SATA3_2 & SATA3_3, and a Blu-Ray as SATA3_4.

Now, when it boots, it flashes the ASRock logo, and all I see is a small white dot on the screen.  All the fans and LEDs light up.


An update: I was able to boot up the computer again after going back to the original disk and then I have changed some of the SATA assignments.  The documentation seems to be mislabeled because the SATA leads are flipped.

The problem now is that I don't seem to be able to boot either a DVD or a USB of Windows 10 so that I can install Windows 10 on the SSD.  Not quite sure yet why this won't work.  The motherboard does not seem to see the Windows system on either device.  I used the Microsoft procedure to create both boot devices.

Any ideas?



Edited by scjconsulting - 28 May 2017 at 12:30pm
scjconsulting
Back to Top
scjconsulting View Drop Down
Newbie
Newbie


Joined: 04 Apr 2017
Location: Minnesota
Status: Offline
Points: 57 		Post Options Post Options   Thanks (0) Thanks(0)   Quote scjconsulting Quote  Post ReplyReply Direct Link To This Post Posted: 28 May 2017 at 1:07am

I purchased a bare system from CyberPowerPC, with a cheap graphic card and just a 1 TB disk.  It booted up on Windows 10, without a license because I had ordered it without an OS. I then swapped in a EVGA 1080 graphics card and that worked fine.  I then pulled the disk out, put in a 500GB SSD as SATA3_1, 2 2TB hard drives as SATA3_2 & SATA3_3, and a Blu-Ray as SATA3_4.

Now, when it boots, it flashes the ASRock logo, and all I see is a small white dot on the screen.  All the fans and LEDs light up.

I have checked all the connections to the board to make sure nothing had gotten loose.  The lead to the disk activity LED broke off during this process, but I don't see what problem that would be.

Since the board does not have a Dr. Debug, are there is there another way to find the problem before going back to the original setup?

Thank you.
scjconsulting
Back to Top
 Post Reply Post Reply Page  <12
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.078 seconds.