AMD Ryzen Compatible Memory List |
Post Reply | Page <1 7891011 17> |
Author | |
cristy6100
Groupie Joined: 15 Mar 2018 Location: Romania Status: Offline Points: 269 |
Post Options
Thanks(0)
|
Main Rig: AMD Ryzen 2400G | ASRock Fatality X370 ITX/ac UEFI 4.90 | Corsair LPX DDR4 2400@3200 1.35V | Corsair RM650i PSU | CM ML120L AiO Cooler
|
|
kerberos_20
Senior Member Joined: 06 Dec 2017 Location: czech republic Status: Offline Points: 3657 |
Post Options
Thanks(0)
|
in bios is called as follow:
TwrwrScL (write to write - same bank group) - 2 TwrwrSc (write to write - different bank group) - 1 TwrwrSd (write to write - different rank) - 5 TwrwrDd (write to write - different dimm) - 5 TrdrdScL (read to read - same bank group) - 1 TrdrdSc (read to read - different bank group) - 1 TrdrdSd (read to read - different rank) - 3 TrdrdDd (read to read - different dimm) - 3 |
|
cristy6100
Groupie Joined: 15 Mar 2018 Location: Romania Status: Offline Points: 269 |
Post Options
Thanks(0)
|
Thanks for clarifying things up, I have these set as follows:
The only difference from your settings is a +1 on both Sd and Dd for read and write, I will got -1 on them as you an report back TwrwrScL - 5 TrdrdScL - 5 TwrwrSc - 1 TwrwrSd - 6 TwrwrDd - 6 TrdrdSc - 1
TrdrdSd - 4 TrdrdDd - 4 Edited by cristy6100 - 01 Apr 2018 at 1:16am |
|
Main Rig: AMD Ryzen 2400G | ASRock Fatality X370 ITX/ac UEFI 4.90 | Corsair LPX DDR4 2400@3200 1.35V | Corsair RM650i PSU | CM ML120L AiO Cooler
|
|
cristy6100
Groupie Joined: 15 Mar 2018 Location: Romania Status: Offline Points: 269 |
Post Options
Thanks(0)
|
Ok so I went with the timings you sugested above, and set 3333MHz with 16-15-15-15-38 and 1.4V
These are the results which again seem low, that L3 Cache speed is much lower now, very odd Any ideeas guys what could be the problem here? Also trying to set CAS lower than 16 will not stick, even tho the bios is telling me 15 in the box, the actual latency as see on the box on the right is still 16 even after a reboot, I am setting memory timings using ASRock Settings from the Overclocking page, not the AMD CBS page Edit1: After load uefi defaults and load just the XMP profile to 3333MHz and 1.35V the scores are exactly the same, so chaning from 16 16 16 16 39 to 16 15 15 15 38 and your sugested timings for R/W made no difference. I can post some screenshots with all the timings so you can check them Edited by cristy6100 - 01 Apr 2018 at 1:55am |
|
Main Rig: AMD Ryzen 2400G | ASRock Fatality X370 ITX/ac UEFI 4.90 | Corsair LPX DDR4 2400@3200 1.35V | Corsair RM650i PSU | CM ML120L AiO Cooler
|
|
kerberos_20
Senior Member Joined: 06 Dec 2017 Location: czech republic Status: Offline Points: 3657 |
Post Options
Thanks(0)
|
cl15 u can set if u disable geardown
your values looks much better, tho your copy is still lacking day 2 with 333mhz and current stable timings: so happy |
|
kerberos_20
Senior Member Joined: 06 Dec 2017 Location: czech republic Status: Offline Points: 3657 |
Post Options
Thanks(0)
|
hmm looking at your pictures, some of your timing has either too high value or too low
coz its impossible (with valid timings) to have lower read speeds than write as for cache...u have 4core cpu, i have 6 core cpu, and this test is multithreaded theres not much u can do with that tbh, only overclock will help :P and dunno if u know, but if u have single ranked ram, then u cant expect to have same transfers coz dual rank is faster (mine :P) but on the other hand, single ranked are easier to overclock which usualy has same effect btw got stable 3400 :-) timings are rather loose atm, still waiting for some random errors (if any) Edited by kerberos_20 - 01 Apr 2018 at 7:27am |
|
cristy6100
Groupie Joined: 15 Mar 2018 Location: Romania Status: Offline Points: 269 |
Post Options
Thanks(0)
|
Indeed the Dual vs Single Rank might make a difference, it could also be as you said different sub-timings between your kit and mine, depending on how GSkill and Corsair set them from the factory.
It might also be the new IMC that Raven Ridge uses that needs some more tweaking with a new Agesa update as Summit Ridge needed until it got to where it is today, getting 3400MHz is very good for 1st gen Ryzen congratulations on the accomplishment. What DRAM voltage did you use to get it to 3400 with 14 15 15 36? PS: When setting timings do you guys usually prefer to set tRP to the same value as tRCDRD/tRCDWR? For the moment I dropped down to 3200MHz with stock SPD timings but managed to lower the voltage to 1.30V from 1.35V, I'll wait for the next Agesa then I'll begin testing in depth the best timings vs frequency vs voltage scaling with the 2400G and this Corsair Single Rank Kit Bumping the 2400G to 4GHz on all cores @ 1.35V and keeping the memory at 3200 with 1.3V and stock timings yielded the following result: Upping to 3333 at 1.4V seems to much voltage for too little bandwidth gains going from 3200 at 1.3V No matter what speeds I choose there is always this 7000-8000MB/s difference between write and copy, and a 1000-2000MB/s for Read to Write... Edited by cristy6100 - 01 Apr 2018 at 10:21am |
|
Main Rig: AMD Ryzen 2400G | ASRock Fatality X370 ITX/ac UEFI 4.90 | Corsair LPX DDR4 2400@3200 1.35V | Corsair RM650i PSU | CM ML120L AiO Cooler
|
|
kerberos_20
Senior Member Joined: 06 Dec 2017 Location: czech republic Status: Offline Points: 3657 |
Post Options
Thanks(0)
|
well i still have some backup pictures on some old settings, i think it may help you:
twrwrscl - 2 trdrdscl - 7 (default) twrwrscl - 2 trdrdscl - 2 |
|
cristy6100
Groupie Joined: 15 Mar 2018 Location: Romania Status: Offline Points: 269 |
Post Options
Thanks(0)
|
I tried as follows
TwrwrScL - 2 TrdrdScL - 2 TwrwrSc - 1 TwrwrSd - 3 TwrwrDd - 3 TrdrdSc - 1 TrdrdSd - 2 TrdrdDd - 2 It made no difference regarding the speeds, the benchmarks were the same, I then tried upping +1 on them, again no difference, this is very odd because for you setting from 7 to 2 for TrdrdScL resolved the copy speeds, it seems with Raven Ridge there is something else going on that affects the copy and write speeds If someone with a 2400G can post a Aida64 Cache and Memory benchmark for comparions it would be great, (latest version of Aida64 is needed for Raven Ridge)
Edited by cristy6100 - 01 Apr 2018 at 6:45pm |
|
Main Rig: AMD Ryzen 2400G | ASRock Fatality X370 ITX/ac UEFI 4.90 | Corsair LPX DDR4 2400@3200 1.35V | Corsair RM650i PSU | CM ML120L AiO Cooler
|
|
stree
Groupie Joined: 17 Dec 2015 Location: Lincolnshire Status: Offline Points: 264 |
Post Options
Thanks(0)
|
Have to add. Dual rank is faster than single...........Check
|
|
ASRock X370-ITX BIOS 4.50
R5 2600 Cryorig C7 EVGA GTX 950 75w 2x8GB Ballistix Sport LT 2933 960Evo M.2 256GB, Firecuda 1TB Win 10 Pro 64 1803 G-Unique Archdaemon 300 Watt Lian-li Q21B |
|
Post Reply | Page <1 7891011 17> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |