|
BIOS 3.00 Pstate OC'ing? |
Post Reply 
|
Page <123> |
| Author | |
Ken429 
Newbie 
Joined: 30 Sep 2015 Location: Indiana Status: Offline Points: 225 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 07 Aug 2017 at 5:09pm |
|
These are the only BIOS settings from the Defaults I changed or may have changed back to the Defaults along the way:
Overclock Mode - Auto CPU Frequency and Voltage Change - Auto Load XMP Setting - XMP 2.0 Profile1 (EVGA 3000-15 Memory) Voltage Mode - Stable CPU Core Voltage - Auto CPU Load-Line Calibration - Level 2 VDDCR Load-Line Calibration - Level 2 Global C-State Control - Disable (To make changes to Pstate0 stick) Global C-State Control - Enabled (After making changes to Pstate0) Pstate1 - Auto Pstate2 - Auto Pstate3 = Disabled Hope this helps, but I don't think the BIOS settings have much todo with the AMD Ryzen Power Plan. You might want to rerun the Ryzen chipset drivers from the site mentioned above. Edited by Ken429 - 07 Aug 2017 at 5:25pm |
|
 |
|
|
prodev42
Newbie
Joined: 30 Jul 2017 Status: Offline Points: 11 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 Aug 2017 at 9:25am |
yah not sure what i am doing wrong, Minimum Processor State does not show up. can you tell me what you disabled/enabled in bios? such as AMD cool quiet, c6, global c-states etc? and for pstate1 did you put on same as pstate0 or used AUTO? Edited by prodev42 - 07 Aug 2017 at 9:26am |
|
|
|
|
Ken429
Newbie
Joined: 30 Sep 2015 Location: Indiana Status: Offline Points: 225 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 Aug 2017 at 7:13am |
|
Here is where I found a link to downloaded the latest chipset drivers.
https://community.amd.com/community/gaming/blog/2017/04/06/amd-ryzen-community-update-3 If you have the "AMD Ryzen Balanced" power plan showing up under Power in the Control Panel then select as follows: Change Plan Settings>Change Advanced Settings>Processor Power Management>Minimum Processor State. I set it to 5% on Battery and 40% when plugged in. Works as advertised for me! |
|
|
|
|
prodev42
Newbie
Joined: 30 Jul 2017 Status: Offline Points: 11 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 Aug 2017 at 6:27am |
|
yah i set pstate1 to auto, p0 = 3900, p2 to @1500 7c/10/6c (also can use @2200 84/c/68), it is working up/down voltage, clocking is on 3900 not changing.... in power plan i can't set minimum...only see a maximum..I downloaded ryzen power plan, same thing, also most ppl say to use windows high performance and not the ryzen one. pic -> http://imgur.com/Bvm5n93 Edited by prodev42 - 07 Aug 2017 at 6:36am |
|
|
|
|
Ken429
Newbie
Joined: 30 Sep 2015 Location: Indiana Status: Offline Points: 225 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 Aug 2017 at 6:00am |
|
|
|
prodev42
Newbie
Joined: 30 Jul 2017 Status: Offline Points: 11 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 Aug 2017 at 3:36am |
|
1. as of now I dont see a way to config Power Plan-Minimum Processor State in windows advanced power settings, like it doesnt show minimum processor frequency field.....so i am gonna try ur settings...do you have to enable global c-states?... 2. yes.. bios 3.0 allow 3200-14 to run at stated speed..just enable xmp profile and give it a SOC voltage of at least 1.1 (i use 1.1) and DRAM voltage at least 1.35 (i use 1.4)
Edited by prodev42 - 07 Aug 2017 at 3:39am |
|
|
|
|
Ken429
Newbie
Joined: 30 Sep 2015 Location: Indiana Status: Offline Points: 225 |
Post Options
Thanks(0)
Quote Reply
Posted: 06 Aug 2017 at 7:28pm |
|
Looks like I'm talking to myself but then it makes me feel better!
I now have the system running on the following settings: Pstate0 set to Custom 9c-8-22 Pstate1 set to Auto Pstate2 set to Custom 84-8-68 (Defaults?) Pstate3,4...set to Disabled Power Plan-Minimum Processor State set to 40% The system is stable at 3900, at least it runs IBT for 10 passes and runs Handbrake for over an hour converting Blu Ray discs to MP4 files. I don't know if it is factual but Handbrake seems to be the best stability test since it keeps all 16 threads running at close to 100%. And...when I put the source file on an SSD vs a standard hard drive the processor wants a notch or two more voltage?? The only problems I am aware of at this time are: The Windows Restart option does not show the BIOS post screen - it just reboots Windows! The ASRock Restart to UEFI program hangs the system! The ASRock AI-Tuning program gets a Division by Zero when loading! None of these are game breakers but...do not instill confidence. Also,does the latest version of the BIOS (3.0) allow the GSkill 3200-14 memory to run at the stated speed? Edited by Ken429 - 06 Aug 2017 at 7:32pm |
|
|
|
|
Ken429
Newbie
Joined: 30 Sep 2015 Location: Indiana Status: Offline Points: 225 |
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jul 2017 at 7:05pm |
|
Thanks to the suggestions in this thread I final got Mr. Ryzen to do what it should:
http://forum.asrock.com/forum_posts.asp?TID=5354&title=x370-taichi-pstate-oc-bug I ended up with: Pstate0 set to Custom 98-8-2C Pstate1 set to Auto 98-8-2C Pstate2 set to Custom 84-8-68 Pstate 3,4... set to Disabled Power Plan-Minimum Processor State set to 40% Don't ask me why or how but the system seems to run as expected with the down voltage and down clock matching the settings in Pstate2. Unfortunately, Restart still goes directly back into Windows. Is this BIOS Version 3.00 bug or is there some other magic setting I'm missing that will fix this...or...am I the only person with this problem? |
|
|
|
|
Ken429
Newbie
Joined: 30 Sep 2015 Location: Indiana Status: Offline Points: 225 |
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jul 2017 at 12:07am |
|
One more issue that I'm having with BIOS version 3.00, The Windows Restart option (Restart, Shutdown and Sleep) goes directly back into Windows. It does not give you the chance to enter the BIOS. It now acts like The "ASRock Restart to UEFI" did when the system was OC'd on BIOS version 2.40. Now with V3.00 I get an added bonus - "ASRock Restart to UEFI" hangs the system whether I have the BIOS set to Defaults or OC'd! One step forward and three backward?
|
|
|
|
|
Ken429
Newbie
Joined: 30 Sep 2015 Location: Indiana Status: Offline Points: 225 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2017 at 6:23pm |
|
parsec or whomever has OC'd the X370 Taichi/Ryzen,
I updated the BIOS to 3.00 and changed the OC'ing method to Pstate CPU @ 3800 MHz @ 127.500V with the memory on Profile1 2933 and the boot time from pressing the power button to the first BIOS screen takes < 9 seconds. That is down from the ~19 seconds it used to take! I tried booting on v3.00 using the OC Tweaker method and it took ~19 seconds. So...Pstate OC'ing has at least one advantage. I Enabled "Global LC State Control" and that allows the Vcore to drop from ~126.000uV to <.500V when Idle but the frequency does not change? I'm still confused on why the Pstate2 settings don't seem to work since the minimum frequency is set to 2200 MHz and the minimum voltage is set to .900V. When I reset everything to Default the system does what it almost is supposed to do, it drops the Vcore down to <.500V and down clocks the CPU to 2200MHz. That's close to what I would expect except Pstate2 says the minimum Vcore should b .900V? Am I the only one with this "problem" when OC'ing the Ryzen X1700 on the ASRock X370 Taichi M/B? Comments please! Edited by Ken429 - 23 Jul 2017 at 12:45am |
|
|
|
|
Post Reply
|
Page <123> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
Ken429 wrote: