|
Asrock H270m pro4 doesn't boot |
Post Reply 
|
| Author | |
Master83 
Newbie 
Joined: 07 Nov 2017 Status: Offline Points: 6 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Asrock H270m pro4 doesn't bootPosted: 07 Nov 2017 at 7:59am |
|
Hello guys,
first time for me in the forum. I assembled a new desktop with the following components: Mobo Asrock H270M Pro4 CPU Intel I5-7400 kaby PSU Thermaltake Smart SE 530W (Haswell ready) 2x 8Gb Corsair Vengeance LPX 2400Mhz CL14 CMK16GX4M2A2400C14R SSD Samsung MZ-V6E250BW SSD 960 EVO, 250 GB, M.2 2x fans Artic F12 PWM PST When i press the power button, fans starts winding, but i got no signal in my monitor. Mouse led is also blinking but the keyboard appear disconnected (no lights on). I tried to connect the monitor both using HDMI that DVI port gotting the same results (no video). What can i do? Should i try something particular? Any led have to light on in the motherboard when powered? |
|
 |
|
|
ASRock_TSD
ASRock_Official 
Joined: 20 Mar 2015 Status: Offline Points: 8907 |
Post Options
Thanks(1)
Quote Reply
Posted: 07 Nov 2017 at 9:55am |
|
Dear Master83,
Thank you for choosing ASRock.
Regarding
your case, we provide some suggestions to try: 1.
Clear CMOS to load BIOS default. 2.
Remove the
power cord, put the clear CMOS jumper to 2-3, and remove the CMOS battery for 3
minutes. Please check user
manual p7 to find the clear
CMOS jumper. http://www.asrock.com/mb/Intel/H97M%20Pro4/?cat=Manual 3.
Only install CPU and one stick memory to
check if the system can boot into BIOS properly. 4.
Please try to install one stick memory at
A1, B1, A2 and B2 slot to check if the system can boot into BIOS properly. 5.
Reinstall CPU and check if CPU socket pin is
fine. 6.
If it is possible, please change another CPU
or DRAM to check if the system can boot into BIOS properly.
Thank
you! Yours
truly, ASRock
TSD |
|
|
|
|
parsec
Moderator Group 
Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 Nov 2017 at 1:38pm |
|
Do you have both the 24 pin ATX and 4/8 pin CPU power cables from the PSU connected to the board? Both are required or the CPU won't start. Is the memory in the A2 and B2 slots? Be sure the memory is fully seated in the DIMM slots. Be sure to have the mouse and keyboard connected to the USB 2.0 ports. The keyboard may not work at all until you install Windows 10, and won't work if you use Windows 7. Are all the parts like the PSU new? Do you think the PSU is working correctly? Did you check the CPU socket for bent pins when you installed the CPU? |
|
|
|
|
|
|
Master83
Newbie
Joined: 07 Nov 2017 Status: Offline Points: 6 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 Nov 2017 at 10:19pm |
|
|
|
|
|
|
Master83
Newbie
Joined: 07 Nov 2017 Status: Offline Points: 6 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 Nov 2017 at 10:22pm |
|
Thanks to you very much. In the next hours i will try to do the things you said.
Hope to write here back victorious!
|
|
|
|
|
Master83
Newbie
Joined: 07 Nov 2017 Status: Offline Points: 6 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Nov 2017 at 8:10pm |
|
Hi! Problem solved!
I have simply disassembled the whole pc and then put back all pieces together and now is working! Thanks everybody. |
|
|
|
|
Xaltar
Moderator Group
Joined: 16 May 2015 Location: Europe Status: Offline Points: 27593 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Nov 2017 at 11:27pm |
|
lil pro tip:
Almost all the pros will eventually resort to a complete teardown and rebuild if they can't work out what the problem is, its surprising how often that works   Glad to hear you got it sorted.
|
|
|
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
Master83 wrote: