Taichi X399 Bios 1.80 and update AGESA to 1.0.0.4 |
Post Reply | Page <123> |
Author | ||
OceanBlue72
Newbie Joined: 06 Jan 2016 Location: Munich Status: Offline Points: 58 |
Post Options
Thanks(0)
|
|
There is no updated bios version for download and until now i have no response from the ASRock support.
I'm running my 64GB quad channel kit G.SKILL Trident F4-3200C14Q DDR4 since bios version 1.30 with the xmp profile at 3200MHz without any problems, the same for 1.50, 1.70 and 1.80. Signature is updated. Edited by OceanBlue72 - 11 Nov 2017 at 7:37pm |
||
Taichi X399, Threadripper 2920X, GSkill F4-3200C14Q-64GTZ, RTX 2080TI, Samsung EVO 850 SSDs, BD Drive, WD 4TB HDD, PSU Antec HCP-1000, Windows 10 64Bit
|
||
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
|
You are correct, OceanBlue72, tech support can be very frustrating. It can work, though. Right now I have an active exchange with both ASRock and AMD about a RAID issue. I hope you are running your memory at nominal settings. If not, open the BIOS and hit F9 (Load UEFI Defaults) and F10 (Save and Exit). Perhaps you should open a thread on your memory POST problems. Please post your specifications in your signature as I have, including power supply and Windows version. By putting it in your signature, it automatically appears on all your pages and can be changed one time which updates all occurrences (old and new). There are several threads here about memory and several about 128 GB problems with lots of advice. Enjoy, John.
|
||
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
||
damaya1982
Newbie Joined: 09 Nov 2017 Status: Offline Points: 12 |
Post Options
Thanks(0)
|
|
I was sent beta v1.71 by ASRock for the Taichi X399, which also says AGESA 1.0.0.3. I had someone send me v1.71 for their board (X399 FPG) and it says 1.0.0.4. The reason I'm looking forward to this update so much is that I've seen 3 people now report that v1.71 fixed their 128GB memory issue with the X399 FPG, which is the same issue that I am having. However, updating to the latest BIOS for my board (v1.80), as well as the beta BIOS that they sent me (v1.71), neither have fixed the issue and I'm still stuck with a board that won't POST with 128GB memory. That leads me to believe that they screwed up somewhere when implementing AGESA 1.0.0.4 in the X399 Taichi, and it's not simply a matter of them simply forgetting to update some version identifier string. Of course, I've emailed ASRock regarding this issue, but I have yet to receive a response. Unfortunately, in my experience thus far, it seems that nobody responds to their support emails. It's been an incredibly frustrating experience dealing with these issues. Edited by damaya1982 - 11 Nov 2017 at 6:45am |
||
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
|
OceanBlue72, I just DLed the copy on US site and it is the same. Do you have a response from Support yet? You should know before us. Almost all of us are users not ASRock employees and have no special information. You can DL the latest on your site and see if it has changed. I hope they will change the BIOS version number - very bad practice not to have a new version. Enjoy, John.
|
||
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
||
damaya1982
Newbie Joined: 09 Nov 2017 Status: Offline Points: 12 |
Post Options
Thanks(0)
|
|
datonyb
Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139 |
Post Options
Thanks(0)
|
|
dont panic
weve had it before with the ryzen bios they FORGOT to change the line of code to say the new agesa version........... it might be the same issue |
||
[url=https://valid.x86.fr/jpg250][/url]
3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
||
OceanBlue72
Newbie Joined: 06 Jan 2016 Location: Munich Status: Offline Points: 58 |
Post Options
Thanks(0)
|
|
Ticket / form via the german ASRock website is done.
|
||
OceanBlue72
Newbie Joined: 06 Jan 2016 Location: Munich Status: Offline Points: 58 |
Post Options
Thanks(0)
|
|
I've made the checksums with HxD:
CRC-32 (Ethernet and PKZIP): 20A4BE6F MD-5: AAC68DA3704C101D0EB13268B6164008 SHA-1: 8F0AF619CF9206C9A64AD9D5789877F10FFD0AE3 SHA-256: 5B8EAD094CBB2D40C58BA3AD2661ACAD02D141946D086F72953A30D567FAA70C SHA-512: 564043DA22ECA171AC22F5B48FD6CB05B483EDBD151EB2A547D78A0E58AC9DAE5FD48F4FAAB06DED728C5B59205B2012C6424D6E8720B34465F35F886AC0CFFE |
||
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
|
Yes, OceanBlue72. Sorry, I did a poor job of communicating. Please check the hash codes of your extracted 1.80 BIOS update: Here are mine for FGP board. I will DL the Taichi and post then in an Edit shortly:
Thanks and enjoy, John. EDIT: Taichi hash codes:
EDIT again: The Taichi file I DLed has the wrong AGESA version number in it or is the wrong file. I would strongly advise you to flash back to 1.70 ASAP! No telling what you have! Please open a ASRock ticket and report this. Edited by MisterJ - 09 Nov 2017 at 8:51am |
||
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
||
OceanBlue72
Newbie Joined: 06 Jan 2016 Location: Munich Status: Offline Points: 58 |
Post Options
Thanks(0)
|
|
Post Reply | Page <123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |