Z170 Gaming K6+ need better voltage offset options

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Due to majority of 6700K's having high VIDs of 1.40V+ the current maximum minus offset you can set is -100mV which isn't enough. All I need currently is 1.28V for my overclock, only having the maximum option -100mV gives me around 1.32~V which is to high for my clock. Was wondering if any rep for asrock reads these forums? A bios update to gives us more flexibility for offset voltages is a must right now, I'm currently stuck with using a fixed voltage which doesn't allow me to use the power saving options like C1E etc.

Please asrock! :(

Edited by shredzy - 17 Aug 2015 at 12:07am

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
shredzy Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 16 Aug 2015 Status: Offline Points: 3	Post Options Post Reply Quote shredzy Report Post Thanks(0) Quote Reply Topic: Z170 Gaming K6+ need better voltage offset options Posted: 16 Aug 2015 at 11:47pm
	Due to majority of 6700K's having high VIDs of 1.40V+ the current maximum minus offset you can set is -100mV which isn't enough. All I need currently is 1.28V for my overclock, only having the maximum option -100mV gives me around 1.32~V which is to high for my clock. Was wondering if any rep for asrock reads these forums? A bios update to gives us more flexibility for offset voltages is a must right now, I'm currently stuck with using a fixed voltage which doesn't allow me to use the power saving options like C1E etc. Please asrock! :( Edited by shredzy - 17 Aug 2015 at 12:07am

Chrysor Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 14 Nov 2016 Status: Offline Points: 1	Post Options Post Reply Quote Chrysor Report Post Thanks(0) Quote Reply Posted: 14 Nov 2016 at 8:09am
	Hi! I just purchased the Z170 Gaming K6 and I have the same problem as OP. When I leave VCore Voltage on Auto it goes up to nearly 1.4V under load. That's why I want to use Offset Mode. With Offset on Auto the Voltage is at around 1.25V, which is OK. But I'd like to go a bit lower in Voltage, since my cpu still gets quite hot. The problem is that I somehow only can use a negative Offset of -100mV, which automatically gets filled in when I just type the minus character. I can't set the offset to any value between -100 and 0 mV. But positive Values are working just fine... To me this seems to be a bug and I'd appreciate if ASRock could confirm and fix this.

Heatspreader Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 13 Jan 2018 Location: Greece Status: Offline Points: 6	Post Options Post Reply Quote Heatspreader Report Post Thanks(0) Quote Reply Posted: 15 Jan 2018 at 8:29am
	Hello! I have the same issue with the Z370 k6. I need more offset than -100mv. I just need 1.22V for my 8700K for 4.7GHz to all cores. Why i have to get 1.350V? Please Asrock, fix this!
	8700K / Z370 Fatal1ty Gaming K6 / TridentZ 3400 / Palit Super JetStream GTX 1060 6GB / NVMe Samsung 960 EVO 500GB