Sata Hotplug doesn´t work...always

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I wanted to have an HDD removable frame in my PC. But as it was done, the Sata-hotplug-function didn´t work reliable. After booting the system, it will work once, but after swap out the disk, it will not get mounted and viewed in windows explorer anymore.

I couldn´t find any hints to the origin of that bug, only, that it seems to work, if i initiate a search for new hardware (drives) in the device-manager, then the drive will mount and is shown in the device-manager and windows explorer.

It seems to have something to do with the energy saving-modes of the system (or plattform). The sata-controller seems to ignore (or not even report), that there is a new drive connected or the drive got reconnected after the bug appears.

And: that failure exists on two Mainboards - H510M-HVS and H610M-HDV.
I replaced the H510M-HVS because of the diagnose, that something on the mainboard was defect. But the failure appeared also on the H610M-HDV. And even after new System-Drive and a full new Windows installation.

Windows 10 Home (22H2)
H510M-HVS and H610M-HDV (Sata-settings on "external" or only "hotplug" on - both did not fix the problem)
usual HDD or SSD in Sata-HDD removable frame or directly connected to the Sata cable.

Sometimes, it seemed to be fixed, if i changed the settings for ASPM-Support. But that also did not fixed the problem. It seemed only to fix it like a reset of condition of the controller or System-state, and then, after some time (and maybe if power-save-states took place) the problem appears again.

Is there a solution for the problem? 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Andromed Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 17 Mar 2020 Location: germany Status: Offline Points: 40	Post Options Post Reply Quote Andromed Report Post Thanks(0) Quote Reply Topic: Sata Hotplug doesn´t work...always Posted: 22 Oct 2024 at 10:13am
	I wanted to have an HDD removable frame in my PC. But as it was done, the Sata-hotplug-function didn´t work reliable. After booting the system, it will work once, but after swap out the disk, it will not get mounted and viewed in windows explorer anymore. I couldn´t find any hints to the origin of that bug, only, that it seems to work, if i initiate a search for new hardware (drives) in the device-manager, then the drive will mount and is shown in the device-manager and windows explorer. It seems to have something to do with the energy saving-modes of the system (or plattform). The sata-controller seems to ignore (or not even report), that there is a new drive connected or the drive got reconnected after the bug appears. And: that failure exists on two Mainboards - H510M-HVS and H610M-HDV. I replaced the H510M-HVS because of the diagnose, that something on the mainboard was defect. But the failure appeared also on the H610M-HDV. And even after new System-Drive and a full new Windows installation. Windows 10 Home (22H2) H510M-HVS and H610M-HDV (Sata-settings on "external" or only "hotplug" on - both did not fix the problem) usual HDD or SSD in Sata-HDD removable frame or directly connected to the Sata cable. Sometimes, it seemed to be fixed, if i changed the settings for ASPM-Support. But that also did not fixed the problem. It seemed only to fix it like a reset of condition of the controller or System-state, and then, after some time (and maybe if power-save-states took place) the problem appears again. Is there a solution for the problem?

Sila121 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 17 Dec 2024 Status: Offline Points: 15	Post Options Post Reply Quote Sila121 Report Post Thanks(0) Quote Reply Posted: 17 Dec 2024 at 3:48pm
	This is no ordinary waffle. waffle game is a highly entertaining game for all players who love word guessing games. You can play with any time. The game is unlimited so you can play multiple times a day without worry.

demetuzdemir Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 2 hours 54 minutes ago Status: Offline Points: 45	Post Options Post Reply Quote demetuzdemir Report Post Thanks(0) Quote Reply Posted: 2 hours 49 minutes ago at 12:28pm
	Absolutely! Waffle Game is such a fun and addictive word puzzle ??the unlimited plays make it even better. It?�s perfect for quick breaks, just like using a background remover free online to get things done effortlessly.