H81 Pro BTC 2.0 won't boot

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi,
This is the first time I've put together a rig. When I turn it on, my screen is blank. The GPU's light up and the CPU fan runs.

Here's my setup:

Board: H81 Pro BTC 2.0
PSU: CORSAIR-HXi-Series-HX1000i
CPU: Intel Celeron Dual-Core G1840
Memory stick: Samsung 32 GB Metal Bar installed with HiveOS
GPUs: 2 x Asus Radeon RX-580
RAM: Kingston HyperX FURY 4GB
Monitor: Raspberry Pi
Speaker: none

Any suggestions?

Edited by ratman - 03 Feb 2018 at 4:04pm

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
ratman Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 03 Feb 2018 Status: Offline Points: 6	Post Options Post Reply Quote ratman Report Post Thanks(0) Quote Reply Topic: H81 Pro BTC 2.0 won't boot Posted: 03 Feb 2018 at 3:04pm
	Hi, This is the first time I've put together a rig. When I turn it on, my screen is blank. The GPU's light up and the CPU fan runs. Here's my setup: Board: H81 Pro BTC 2.0 PSU: CORSAIR-HXi-Series-HX1000i CPU: Intel Celeron Dual-Core G1840 Memory stick: Samsung 32 GB Metal Bar installed with HiveOS GPUs: 2 x Asus Radeon RX-580 RAM: Kingston HyperX FURY 4GB Monitor: Raspberry Pi Speaker: none Any suggestions? Edited by ratman - 03 Feb 2018 at 4:04pm

Animalm4st3r Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 29 Jan 2018 Status: Offline Points: 226	Post Options Post Reply Quote Animalm4st3r Report Post Thanks(0) Quote Reply Posted: 03 Feb 2018 at 5:09pm
	Never put a system together and starting off with mining? ;) Wich Video output do u use?

ratman Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 03 Feb 2018 Status: Offline Points: 6	Post Options Post Reply Quote ratman Report Post Thanks(0) Quote Reply Posted: 03 Feb 2018 at 5:28pm
	I'm ambitious! Haha. I connected the Raspberry Pi to the HDMI port on the 1st GPU. I initially got the "Install the PSU's 4-pin connectors on your motherboard." I connected the power supply to both of the 4-pin connectors and the message went away. However, my screen is blank on boot. I plan on getting a speaker Sunday in case that's needed for diagnosing the problem. Edited by ratman - 03 Feb 2018 at 6:28pm

Animalm4st3r Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 29 Jan 2018 Status: Offline Points: 226	Post Options Post Reply Quote Animalm4st3r Report Post Thanks(0) Quote Reply Posted: 03 Feb 2018 at 7:30pm
	So 4Pin Molex is connected? 24 Pin ATX Is connected? 8 Pin EPS is connected? Are all Videocards connected? Did u try connecting your screen to the Onboard HDMI port? Did u try a regular screen already and or did u try ur Rasperry Screen on a different PC?

ratman Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 03 Feb 2018 Status: Offline Points: 6	Post Options Post Reply Quote ratman Report Post Thanks(0) Quote Reply Posted: 03 Feb 2018 at 8:18pm
	Yes, all those are connected. When I plug the Raspberry into the onboard HDMI, I get a "no signal" message. I plugged the Raspberry into a laptop and it worked.

ratman Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 03 Feb 2018 Status: Offline Points: 6	Post Options Post Reply Quote ratman Report Post Thanks(0) Quote Reply Posted: 04 Feb 2018 at 1:01pm
	I unplugged everything and plugged it all back in. Now, I'm getting the "no signal" message whether I plug the HDMI cable into the GPU or the onboard HDMI port. Any ideas?