Beebox-2 7200U 5.1 Audio How To?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I don't own this NUC, I am at my preliminary research. My question surrounds how I am going to manage 5.1 sound when the Bb is connected to my philips 43 inch 4k monitor (BDM4350).

Ok, so front audio port is only 2.0, headset kinda thing, gotcha.

There are no other audio ports except (USB obviously) and the HDMI 2.0, which I am assuming carries the 5.1/7.1?

Thing is, even tho the HDMI 2.0 could connect to the philips 4k 43 inch monitor and give 60hz/fps, the montitor itself is a fairly closed system, no audio out other than a headphone 3.5mm jack itself.

Clearly this Bb NUC was aimed at a real 4k TV that then had optical and analogue outs.

My thinking is this;

Could I use the Display Port from the Bb and connect to the 4k 43inch philips, then use an HDMI 2.0 cable, connect to the HDMI 2.0 port, take that cable into some kind of (cheap) powered adapter, whereby I can then convert the signal to analogue or optical out, which can then connect up to my 5.1 Logitech stereo system (which only has coaxial, optical and analogue inputs.

Can i then from the Windows Sound Control Panel specify the Bb to use the HDMI Audio, and even tho the display is using the Display port it will all work fine?

Am i barking up the right tree? 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
BruceBanner Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 05 Feb 2018 Location: NSW Status: Offline Points: 3	Post Options Post Reply Quote BruceBanner Report Post Thanks(0) Quote Reply Topic: Beebox-2 7200U 5.1 Audio How To? Posted: 05 Feb 2018 at 6:49pm
	I don't own this NUC, I am at my preliminary research. My question surrounds how I am going to manage 5.1 sound when the Bb is connected to my philips 43 inch 4k monitor (BDM4350). Ok, so front audio port is only 2.0, headset kinda thing, gotcha. There are no other audio ports except (USB obviously) and the HDMI 2.0, which I am assuming carries the 5.1/7.1? Thing is, even tho the HDMI 2.0 could connect to the philips 4k 43 inch monitor and give 60hz/fps, the montitor itself is a fairly closed system, no audio out other than a headphone 3.5mm jack itself. Clearly this Bb NUC was aimed at a real 4k TV that then had optical and analogue outs. My thinking is this; Could I use the Display Port from the Bb and connect to the 4k 43inch philips, then use an HDMI 2.0 cable, connect to the HDMI 2.0 port, take that cable into some kind of (cheap) powered adapter, whereby I can then convert the signal to analogue or optical out, which can then connect up to my 5.1 Logitech stereo system (which only has coaxial, optical and analogue inputs. Can i then from the Windows Sound Control Panel specify the Bb to use the HDMI Audio, and even tho the display is using the Display port it will all work fine? Am i barking up the right tree?

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8727	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 13 Jun 2018 at 6:20pm
	Dear BruceBanner, Thanks for posting your query to ASRock forum. Referring your question about using HDMI to output sound through a adapter and using display port to output graphic, this should work, however we have not tested our Beebox HDMI port using adapters to connect to audio devices, so we still recommend user to plug their HDMI port to amplifier to have best experience while watching 4K with 5.1 channel sound. With thanks, ASRock TSD Edited by ASRock_TSD - 13 Jun 2018 at 6:20pm