AB350 ITX, throttle/stutters FIX

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Yesterday I wrote about bios mistery (unsaving settings) and APU throttling - http://forum.asrock.com/forum_posts.asp?TID=7834&title=2400g-troubles-bios-mysteries-igp-throttling
Finally I found the solution how to fix these issues on Asrock ab350 itx and 2400g. 
How to fix APU throttling and unsaving settings
Go to the Bios (press DEL when system starts) -> Reset settings and reboot -> Go to OC Tweak tab -> Change CPU frequency HIGHER than base clock (ex. 3625) -> change voltage (ex. 1.25) -> Save and reboot.
Now IGP will not bounce anymore and have stable frequency. Games stutters will disappear.

After that all unbios tools will work fine. Download F-Stream Tuning utility and OC or Underclock your CPU. You can OC your IGP on the Ryzen Master.

Personally I use it for underclocking because have very tiny build. My 2400G working now at 3.4ghz@1.03v

I hope it helps!

Edited by 111a - 27 Feb 2018 at 11:50am

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
111a Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 26 Feb 2018 Status: Offline Points: 16	Post Options Post Reply Quote 111a Report Post Thanks(0) Quote Reply Topic: AB350 ITX, throttle/stutters FIX Posted: 27 Feb 2018 at 11:35am
	Yesterday I wrote about bios mistery (unsaving settings) and APU throttling - http://forum.asrock.com/forum_posts.asp?TID=7834&title=2400g-troubles-bios-mysteries-igp-throttling Finally I found the solution how to fix these issues on Asrock ab350 itx and 2400g. How to fix APU throttling and unsaving settings Go to the Bios (press DEL when system starts) -> Reset settings and reboot -> Go to OC Tweak tab -> Change CPU frequency HIGHER than base clock (ex. 3625) -> change voltage (ex. 1.25) -> Save and reboot. Now IGP will not bounce anymore and have stable frequency. Games stutters will disappear. After that all unbios tools will work fine. Download F-Stream Tuning utility and OC or Underclock your CPU. You can OC your IGP on the Ryzen Master. Personally I use it for underclocking because have very tiny build. My 2400G working now at 3.4ghz@1.03v I hope it helps! Edited by 111a - 27 Feb 2018 at 11:50am

Alper4458 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 18 Jul 2018 Location: Turkey Status: Offline Points: 10	Post Options Post Reply Quote Alper4458 Report Post Thanks(0) Quote Reply Posted: 20 Jul 2018 at 9:59pm
	a320m everything stuttering can i do anything for this?

Mobawe Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 16 Mar 2018 Location: Denmark Status: Offline Points: 13	Post Options Post Reply Quote Mobawe Report Post Thanks(0) Quote Reply Posted: 27 Jul 2018 at 4:28pm
	Hi The reason that is working is because by altering the CPU base clockspeed up from the 3600 the boost funktionality will be turned off. The boost funktionality is creating the stuttering. I have just enabled the boost funktionality in the BIOS. Then the CPU is also allowed to clock down when idle and not forced to stay fixed at the high clock. I dont care that I dont get the boost funktionality because the CPU is already fast and not the critical factor at play (unless you primarily do CPU stressing kind of works which the majority dont). It is the GPU that needs to get pushed as far as possible and that is much easier when the CPU is not creating heat etc from flying all over the place.
	Ryzen 5 2400g/ ASRock Fatal1ty AB350 Gaming-ITX/ NH-L9A-AM4 L.PROFILE/ INWIN-CHOPIN 150W/ G.Skill Ripjaws V-DDR4,2x8-3600MHz(F4-3600C16D-16GVK)/ Samsung 850 EVO MZ-75E500-SSD-500GB/ UEFI-bios 4.51A