new beta bios for X399 is up on ASRock site

Hello,

I was asked to post the below message, so I hope it is not redundant:

Bryan, please post this message I received for ASRock Support:
The bios 3.20 is for 2nd Gen of TR4 processor. Since your processor is 1st Gen of TR4, please keep the bios version on 2.00.
Please point out that it came from ASRock support.

B.

have to use https://imgur.com/ to post pics. Upload image, hover over image and get the drop down box and select share link then use BBC Code(Forums)







Edited by lowdog - 07 Aug 2018 at 5:09am

lowdog wrote: [URL=][/URL] ajc9988 wrote: My stable 3466 timings: 14-15-14-14-28-42-6-9-18-4-12-12-0-2-2-288-14-10-7-4-1-6-6-1-4-4-1 1T ProcODT 53, RTT /7;Dyn off; /4 CAD_BUS 0;1;1 CAD_BUS Strength 20, 20, 20, 20 CLDO 913 I'm too lazy to type each timing name, etc. The 0 timing in the middle is the Trcpage and the tRFC2 and 4 is omitted. This is with channel interleaving at 512 and hash enabled. And which Rtt would be set to 7? and what values are the other Rtt's set to? What is Dyn off?

I left RTT as a category, not as that. It is done in order, with the first RTT_NOM being RZQ/7, the RTT_WR off being listed as Dynamic ODT off, if you ever played in that menu, and the RTT_Park being RZQ/4. It is listed top to bottom.

for CAD_BUS AddrCmd, I set to 0, CAD_BUS CsODT I set to 1, for CAD_BUS Cke, I set to 1. If you want the images, check out those I have posted over in this thread at OCN https://www.overclock.net/forum/13-amd-general/1640919-ryzen-dram-calculator-1-1-0-beta-2-overclocking-dram-am4-250.html#post27563294

My last couple posts in there have the BMP files from the Asrock BIOS/UEFI itself, has my stability testing screenshots, and has my CB15 benches. The one I linked has my ram report from Thaiphoon Burner as well, so you can see what hardware I'm working with.

As I said, images are easier, and asking to type out every blessed timing is worthless for troubleshooting.

I believe you had an image shared at the start of this thread. Can you tell me what I need to do to post mine here?


Edited by ajc9988 - 07 Aug 2018 at 1:26am

[URL=][/URL]

ajc9988 wrote: My stable 3466 timings: 14-15-14-14-28-42-6-9-18-4-12-12-0-2-2-288-14-10-7-4-1-6-6-1-4-4-1 1T ProcODT 53, RTT /7;Dyn off; /4 CAD_BUS 0;1;1 CAD_BUS Strength 20, 20, 20, 20 CLDO 913 I'm too lazy to type each timing name, etc. The 0 timing in the middle is the Trcpage and the tRFC2 and 4 is omitted. This is with channel interleaving at 512 and hash enabled.

And which Rtt would be set to 7? and what values are the other Rtt's set to?


What is Dyn off?

Edited by lowdog - 06 Aug 2018 at 11:34am

I do not think their servers store and save images.