Pstate overclock not working |
Post Reply |
Author | |
jr777
Newbie Joined: 26 May 2018 Status: Offline Points: 4 |
Post Options
Thanks(0)
Posted: 27 May 2018 at 5:10am |
Hi asrock forum. I am currently using asrock x470 gaming k4 with ryzen 7 2700x. I tried pstate oc, and set pstate 0 to desired fid and vid to 4.2 ghz and 1,43v. I set the pstate 1 and 2 to custom, but using the default value. As i boot to windows, using windows balanced power plan and set processor min state to 20%, the frecuecy fluctuates low in idle and high in load as expected. But the volyage is fixed. It doesn't change from 1.43v as in pstate 0. I understand that there was a bug in pstate oc as in the past, or maybe there is still now. Some said that we can only touch fid in pstate 0 and leave others untouched then cranck the voltsge by using vcore offset voltage in oc tweaker or else the bug will consider it a full oc. But... isnt that crazy to crank up to 4,2 without voltage increasement. This board doesn't even have vcore offset voltage in oc tweaker menu, please asrock add the menu of vcore offset voltage in oc tweaker for upcoming bios so i can use pstate overclocking. Thanks
Edited by jr777 - 27 May 2018 at 5:11am |
|
Reinvented
Newbie Joined: 22 Jun 2017 Status: Offline Points: 113 |
Post Options
Thanks(0)
|
You are going to get worse performance by trying to use Pstate overclocking on 2xxx series. If you want it downclock further, set minimum processor state in power plan to 5%.
Other than that, Offset voltage is required for proper Pstate overclocking. You shouldn't be touching any other value besides the FID in each state.
|
|
jr777
Newbie Joined: 26 May 2018 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
That is why i cant get proprr pstate oc. There are no core voltage offset menu in oc tweaker. That is why i am complaining because asrock somehow NEEDS to implement this in the upcoming bios. This has been a misery of overclocking in this board
|
|
ALB92
Newbie Joined: 11 May 2018 Status: Offline Points: 14 |
Post Options
Thanks(0)
|
From personal testing there is litle difference between simple manual OC and Pstate OC so i would advise you to just set your frequency and voltage in OC Tweaker and call it a day ( at least for now ) .
This being said i agree that it's unacceptable for such a board to not have offset options. Frankly i don't know if Asrock bios team is overloaded but Asrock bios quality is very dissapointing wich is a shame because their hardware is good quality . I personnaly am confident will never buy one of their boards again because of this and im looking forward to get rid of my ab350itx/ac . |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |