X470 taichi error 46

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Post code 46 is a memory initialization code. Generally when you get this code you should pull the CPU and check for bent pins then reseat the CPU and RAM. Then clear CMOS and try again. If that still pops a 46 post code then see if you can try a RAM module from a different brand/model. Also only use one RAM module for testing until you are able to get a proper POST screen.
Good luck  

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Online Points: 27113	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Topic: X470 taichi error 46 Posted: 17 Sep 2018 at 11:47pm
	Post code 46 is a memory initialization code. Generally when you get this code you should pull the CPU and check for bent pins then reseat the CPU and RAM. Then clear CMOS and try again. If that still pops a 46 post code then see if you can try a RAM module from a different brand/model. Also only use one RAM module for testing until you are able to get a proper POST screen. Good luck


cx5 Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 15 Sep 2017 Location: Hong Kong Status: Offline Points: 2398	Post Options Post Reply Quote cx5 Report Post Thanks(0) Quote Reply Posted: 17 Sep 2018 at 5:25pm
	try your luck using one stick only !!! good luck !!!
	x370taichi@3.50gen4 AX750 Optane900P SN770 3800x PosdonZro4 BarrowPWM-17w>420x140x28 XFX SWFT319 6900XT MSI RX560 LP to get Fluid Motion BlueskyFRC 75hz

drkstorm1 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 15 Sep 2018 Status: Offline Points: 3	Post Options Post Reply Quote drkstorm1 Report Post Thanks(0) Quote Reply Posted: 16 Sep 2018 at 7:51am
	Just build my new system and can't get it to display or do anything and all i get is error 46 on the motherboard.. From what i'm seeing that error usually a ram issue of some kind. My ram is compatible with the motherboard if i read the Asrock compatibility form correctly. I checked all my connections,tried both ram sticks in different slots and reset cmos more then once. Even with my ram removed entirely i still get error 46 which someone said somewhere might make it a motherboard issue? Grateful for any help/support. TY