|
J5005 BIOS update |
Post Reply 
|
| Author | |
NNEERR 
Newbie 
Joined: 30 Sep 2018 Status: Offline Points: 20 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: J5005 BIOS updatePosted: 30 Sep 2018 at 3:40am |
|
ASRock should include a jumper to the board!
It's a no-go that you/we have to close a jumper for doing an update of the UEFI BIOS, without including a suitable jumper. |
|
 |
|
|
djoser
Newbie
Joined: 17 Sep 2018 Status: Offline Points: 33 |
Post Options
Thanks(0)
Quote Reply
Posted: 20 Sep 2018 at 11:09pm |
|
I just did the update from P1.00 to P1.30 without problems.
A further update from P1.30 to P1.40 was successful, too.
|
|
|
Why mine when you can research? - GRIDCOIN - Real cryptocurrency without wasting hashes! www.gridcoin.us
|
|
|
|
|
djoser
Newbie
Joined: 17 Sep 2018 Status: Offline Points: 33 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Sep 2018 at 10:14pm |
|
I just got word from ASRock support.
They send me a pdf with update instructions. The procedure described in the link above is INCOMPLETE, or let's say unclear. The metal (jumper) from step 2 has to be kept in place the whole update procedure until step 7 (powering off). I didn't try it by now, but i will within the next few days and let you folks know, if it's working. I'd like to attach this pdf-file but i can't find the function in the forum. Regards, djoser.
|
|
|
Why mine when you can research? - GRIDCOIN - Real cryptocurrency without wasting hashes! www.gridcoin.us
|
|
|
|
|
Xaltar
Moderator Group 
Joined: 16 May 2015 Location: Europe Status: Offline Points: 28143 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Sep 2018 at 2:40am |
|
Hmm, well, I don't have a board like yours to test with so I am out of ideas
 Open a support ticket with ASRock Tech Support, they should be able to tell you what's up: https://event.asrock.com/tsd.asp If anyone else reading this has any ideas, feel free to chime in.
|
|
|
|
|
|
|
djoser
Newbie
Joined: 17 Sep 2018 Status: Offline Points: 33 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Sep 2018 at 2:18am |
|
Thanks for your suggestion.
I pulled the power chord for several HOURS now and additionally followed your hint. I even shorted the txe1 header for hours now. Still no effect!
|
|
|
Why mine when you can research? - GRIDCOIN - Real cryptocurrency without wasting hashes! www.gridcoin.us
|
|
|
|
|
Xaltar
Moderator Group
Joined: 16 May 2015 Location: Europe Status: Offline Points: 28143 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Sep 2018 at 12:07am |
|
It sounds like you didn't completely drain the power from the board before shorting the pins. Pull the power cord from the wall then press and hold the power button down for about 10 seconds. That should fully discharge all the boards caps. Then short the pins and check the firmware version again.
|
|
|
|
|
|
|
|
djoser
Newbie
Joined: 17 Sep 2018 Status: Offline Points: 33 |
Post Options
Thanks(0)
Quote Reply
Posted: 17 Sep 2018 at 7:15pm |
|
Hello,
i own the J5005-ITX with BIOS version P1.00. I want to update the BIOS to the latest version. To do so the website says i have to update to version P1.30 first. I followed the instructions on http://www.asrock.com/support/BIOSIG.asp?cat=Windows10 but after executing step 2 the BIOS still shows "TXE FW Version 4.0.0.1235" (step 3). I used a jumper to shortcut TXE1 header and removed it after a few seconds. I should not proceed until "N/A" is being displayed, right? What should i do now? Thanks and regards, djoser. BTW: I bought the Intel Wireless AC 9560 for this board. Will it work? Edited by djoser - 17 Sep 2018 at 7:34pm |
|
|
Why mine when you can research? - GRIDCOIN - Real cryptocurrency without wasting hashes! www.gridcoin.us
|
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options