TRX40 Taichi Memory Support |
Post Reply |
Author | |
Sukiyucky
Newbie Joined: 06 Dec 2019 Status: Offline Points: 3 |
Post Options
Thanks(0)
Posted: 06 Dec 2019 at 1:04pm |
What vendor and modules are supported for this motherboard at 4266-4666Mhz?
Specifications say it supports up to 4666 DDR4. https://www.asrock.com/mb/AMD/TRX40%20Taichi/index.asp#Specification Memory - Quad Channel DDR4 Memory Technology - 8 x DDR4 DIMM Slots - Supports DDR4 4666(OC)+ / 4600(OC) / 4533(OC) / 4466(OC) / 4400(OC) / 4333(OC) / 4266(OC) / 4200(OC) / 4133(OC) / 4000(OC) / 3866(OC) / 3800(OC) / 3733(OC) / 3600(OC) / 3466(OC) / 3200 / 2933 / 2667 / 2400 / 2133 ECC & non-ECC, un-buffered memory (U-DIMM) - Max. capacity of system memory: 256GB - 15μ Gold Contact in DIMM Slots Your memory QVL has no database entries to show that you validated this. Sorting on Supported speed shows the highest is HyperX 4266. https://www.asrock.com/mb/AMD/TRX40%20Taichi/index.asp#Memory Memory QVL Type RAM Speed??Supported Speed Size Module Chip SS/DS DIMM Socket Support OC Note DDR4 HyperX 4266 4266 8GB HX442C19PB3K2/16 Samsung B-die SS 2 v DDR4 Corsair 4266 4266 8GB CMT64GX4M8X4266C19 ver4.31 SS 2/4 v DDR4 Corsair 4200 4200 8GB CMK64GX4M8X4200C19 ver4.31 SS 2/4 v DDR4 Corsair 4133 4133 8GB CMK32GX4M4E4133C19R SS 2/4 v DDR4 Corsair 4133 4133 8GB CMK32GX4M4E4133C19R Ver:4.31 SS 2/4 v DDR4 ADATA 4133 4133 8GB AX4U41338G19-SR80 SS 2/4 v |
|
gizmic
Groupie Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
Post Options
Thanks(0)
|
surely samsung B-die with stupidly high timings would run that
fun aside just take it as the bios has the option to set those speeds instead of looking for a kit that is rated at those speeds anything beyond 4200 requires lots of time to tweak |
|
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |