![]() |
Z590 Taichi no video in BIOS |
Post Reply ![]() |
Author | |
Petercat ![]() Newbie ![]() Joined: 13 Jan 2024 Status: Offline Points: 65 |
![]() ![]() ![]() ![]() ![]() Posted: 13 Jan 2024 at 10:00am |
This is weird. When the computer is shut off, if I hit the power button it boots into Win10 like normal and everything is fine.
But if I use the ASRock Restart to UEFI, or if I restart and tap the F2 key, either way, it enters UEFI (code Ab) but there is no video output. I've tried every video out port on the computer and no joy. If I shut it off and restart, once again, it boots to Windows as normal. ASRock Z590 Taichi i7-11700K 128GB Corsair Vengeance DDR4 3200 Dual MSI 3060 graphics cards. Display on motherboard graphics WD Black SN770 2TB boot drive 2 Crucial 4TB NVME RAID-1 2 WD 10 TB Gold RAID-1 Can anyone help me figure out why there is no video signal from any port when it's in BIOS? Trying every port on two graphics cards and the motherboard took a while. This is driving me crazy! |
|
![]() |
|
JHGBaouns ![]() Newbie ![]() Joined: 15 Jan 2024 Location: linköping Status: Offline Points: 30 |
![]() ![]() ![]() ![]() ![]() |
Hi!
I got the exact same problem with my z790 Steel Legend. Did you work how to get bios to show? I use a F processor and a GTX 1070 with no luck however I plug it in. |
|
![]() |
|
Petercat ![]() Newbie ![]() Joined: 13 Jan 2024 Status: Offline Points: 65 |
![]() ![]() ![]() ![]() ![]() |
Nope, not yet. Since I'm running the monitor off the onboard graphics, I think I'll try removing the graphics cards. Maybe they're confusing the bios, I dunno.
I've been using ASRock motherboards since 2016, and this is the second time. The first one - Z170 Extreme 7+ eventually cured itself, maybe this one will too. Perhaps if I leave a little barbecue in the bottom of the case overnight, it will make the gremlins happy. Or else they'll invite their friends over. |
|
![]() |
|
JHGBaouns ![]() Newbie ![]() Joined: 15 Jan 2024 Location: linköping Status: Offline Points: 30 |
![]() ![]() ![]() ![]() ![]() |
FYI.
I got it to work. I disconnected all video output cables except one DVI cable. Now I got the bios screen and could upgrade the bios. Hope it can help. |
|
![]() |
|
Petercat ![]() Newbie ![]() Joined: 13 Jan 2024 Status: Offline Points: 65 |
![]() ![]() ![]() ![]() ![]() |
Nothing has worked. I even upgraded from twin 3060s to a 3090 graphics card, and while I had the cards out tried to get into the BIOS with three different monitors on the motherboard port. No joy. The computer just refuses to output a video signal while in BIOS.
I don't get it, it was working fine, I didn't change anything, but one day the motherboard just quit displaying video while in BIOS. I was on the same monitor, same video port (motherboard), same cards, same everything. It just quit working. All ports will put out a video signal in Windows, none will in BIOS. It's driving me crazy! |
|
![]() |
|
M440 ![]() Senior Member ![]() Joined: 12 Jul 2023 Status: Offline Points: 3115 |
![]() ![]() ![]() ![]() ![]() |
IMO bios thinks it is sending signal to some video output succesfuly - (thats why you dont get video until OS). |
|
asrock b650m/hdv.m2, ryzen 7700x@85watt
|
|
![]() |
|
Petercat ![]() Newbie ![]() Joined: 13 Jan 2024 Status: Offline Points: 65 |
![]() ![]() ![]() ![]() ![]() |
I have the BIOS screen now.
I bought a new monitor - an Acer superwide 34" - and all I did was move the video cable from the old monitor to the new one. Now everything's normal. I can get into BIOS. It was the settings, I was running the old 4K monitor at 1920 X 1440, and the new one at the stock 3440 X 1440. I switched the cable back to the old monitor and changed the settings to the stock 3440 X 2160, and can now get into BIOS with it, as well. I guess BIOS doesn't like anything but stock monitor resolution. Now I have an extra monitor... |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |