No UEFI Setup graphics when disabling CSM

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello everyone,

I currently try to setup a new PC with the following components:
* ASRock B550M Phantom Gaming 4
* Ryzen 5 5600
* ASUS DUAL GeForce RTX 4070 SUPER OC EVO
* 2x8GB G.Skill RipJaws V DDR4-3200
* WD Black SN770 1TB

TLDR: Even with most recent BIOS version, I am unable to install Windows 11, as I do not have graphics output after disabling CSM. What can I do?

When I tried to install Windows 11, the setup asked me to enable secure boot, which I can only do when I disable CSM (Compatibility Support Module) first.
So I disabled CSM, but after the reboot there was no graphics output.

I found several tips online (like using HDMI, using internal graphics, ...) but as I do not have an iGPU, the only thing I could do was connect the RTX4070 via HDMI. Still no picture.

Next, I removed the CMOS battery and put it back in which reset the BIOS.
I then installed Windows 10 (I could not use GPT partitioning here because of the activated CSM, hence legacy boot) to check if everything works as far as the hardware goes. This went fine.
I ran NVIDIA GPU UEFI Firmware Update Tool, which told me the GPU firmware was "already up to date".

I then successfully updated the Bios to the most recent version (3.40).
After disabling CSM again I saw the same beahviour, no graphics output at all (of course windows 10 did not boot because of the legacy partitioning).

As a last test, I switched GPU to an old ASUS GTX1050 Ti that is running just fine in another Windows 11 PC, but the beaviour was the same, no graphics.

I am really running out of ideas here.
Did I simply miss some other setting in the BIOS that I need to change?
Is there any way to boot UEFI even with CSM enabled?

I am grateful for any input or ideas.
Thanks in advance,
Tobi

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
klunz Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 25 Jun 2024 Status: Offline Points: 50	Post Options Post Reply Quote klunz Report Post Thanks(1) Quote Reply Topic: No UEFI Setup graphics when disabling CSM Posted: 25 Jun 2024 at 3:49pm
	Hello everyone, I currently try to setup a new PC with the following components: * ASRock B550M Phantom Gaming 4 * Ryzen 5 5600 * ASUS DUAL GeForce RTX 4070 SUPER OC EVO * 2x8GB G.Skill RipJaws V DDR4-3200 * WD Black SN770 1TB TLDR: Even with most recent BIOS version, I am unable to install Windows 11, as I do not have graphics output after disabling CSM. What can I do? When I tried to install Windows 11, the setup asked me to enable secure boot, which I can only do when I disable CSM (Compatibility Support Module) first. So I disabled CSM, but after the reboot there was no graphics output. I found several tips online (like using HDMI, using internal graphics, ...) but as I do not have an iGPU, the only thing I could do was connect the RTX4070 via HDMI. Still no picture. Next, I removed the CMOS battery and put it back in which reset the BIOS. I then installed Windows 10 (I could not use GPT partitioning here because of the activated CSM, hence legacy boot) to check if everything works as far as the hardware goes. This went fine. I ran NVIDIA GPU UEFI Firmware Update Tool, which told me the GPU firmware was "already up to date". I then successfully updated the Bios to the most recent version (3.40). After disabling CSM again I saw the same beahviour, no graphics output at all (of course windows 10 did not boot because of the legacy partitioning). As a last test, I switched GPU to an old ASUS GTX1050 Ti that is running just fine in another Windows 11 PC, but the beaviour was the same, no graphics. I am really running out of ideas here. Did I simply miss some other setting in the BIOS that I need to change? Is there any way to boot UEFI even with CSM enabled? I am grateful for any input or ideas. Thanks in advance, Tobi

klunz Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 25 Jun 2024 Status: Offline Points: 50	Post Options Post Reply Quote klunz Report Post Thanks(0) Quote Reply Posted: 26 Jul 2024 at 5:17pm
	I thought this was supposed to be the official ASRock Forum. I am not the only person reporting this problem, there are several reports of similar issues on reddit and elsewhere. It is rather sad that its been over a month now and there is no reaction whatsoever. For me this means that I will probably not get another ASRock when I go motherboard shopping in the future. https://forum.asrock.com/smileys/smiley18.gif

duytoi Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 26 Jul 2024 Location: VN Status: Offline Points: 15	Post Options Post Reply Quote duytoi Report Post Thanks(0) Quote Reply Posted: 26 Jul 2024 at 6:09pm
	To boot in UEFI mode, you need this standard boot disk. First, you need a USB drive with at least 8GB of storage. Then, download the BOOT ANHDV software to create a bootable USB in both LEGACY and UEFI modes. After successfully creating the bootable USB, enter the BIOS setup and switch to UEFI mode, ensuring that SECURITY BOOT is enabled. Restart the computer and boot from the newly created USB to access Win MINI. Next, you need to convert your disk to GPT to reinstall the operating system. Enjoy
	The CEO of VNET GLOBAL., LTD is passionate about dich vu dich tieng anh and Chinese translation services.