![]() |
uefi 5.1 x370 taichi EASTER egg surprise |
Post Reply ![]() |
Page <12 |
Author | |
cx5 ![]() Senior Member ![]() Joined: 15 Sep 2017 Location: Hong Kong Status: Offline Points: 2398 |
![]() ![]() ![]() ![]() ![]() |
WoW, you so luck !!!!! Hynix ram so good ???? what part number? may be is newest 14nm type ??? |
|
x370taichi@3.50gen4
AX750 Optane900P SN770 3800x PosdonZro4 BarrowPWM-17w>420x140x28 XFX SWFT319 6900XT MSI RX560 LP to get Fluid Motion BlueskyFRC 75hz |
|
![]() |
|
paologab ![]() Newbie ![]() ![]() Joined: 21 Nov 2018 Location: Milan Status: Offline Points: 112 |
![]() ![]() ![]() ![]() ![]() |
I don't know. I don't think, is on the QVL, Hyperx PredatorHX432C16PB3K2/16.
Btw @3466 boots and works ok, but memtest gives errors. I'll stay @3400 and fine tune the offset. |
|
AMD Ryzen 7 2700X w/Wraith prism
x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |
|
![]() |
|
paologab ![]() Newbie ![]() ![]() Joined: 21 Nov 2018 Location: Milan Status: Offline Points: 112 |
![]() ![]() ![]() ![]() ![]() |
strange enough @3400 a Windows 10 WinPE ISO loads all the stuffs and then freeze with the window logo.
|
|
AMD Ryzen 7 2700X w/Wraith prism
x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |
|
![]() |
|
cx5 ![]() Senior Member ![]() Joined: 15 Sep 2017 Location: Hong Kong Status: Offline Points: 2398 |
![]() ![]() ![]() ![]() ![]() |
I never do memtest, no patience, I only use game to test, if no crash then good enough, hahhahhhaa lazy way.
|
|
x370taichi@3.50gen4
AX750 Optane900P SN770 3800x PosdonZro4 BarrowPWM-17w>420x140x28 XFX SWFT319 6900XT MSI RX560 LP to get Fluid Motion BlueskyFRC 75hz |
|
![]() |
|
paologab ![]() Newbie ![]() ![]() Joined: 21 Nov 2018 Location: Milan Status: Offline Points: 112 |
![]() ![]() ![]() ![]() ![]() |
it's better as memtest doesn't push the pc to his limit... two pigeons with a stone!
|
|
AMD Ryzen 7 2700X w/Wraith prism
x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |
|
![]() |
|
xhue ![]() Groupie ![]() Joined: 17 Aug 2018 Status: Offline Points: 634 |
![]() ![]() ![]() ![]() ![]() |
Real memtest86 is designed specifically to test with word patterns, which are quite exhaustive. The goal is to use data words that has the highest probability of causing instability or catching other issues like bit flipping, etc.
While one shouldn't dismiss easily the full power of memtest86, it's always wise to test with other apps as well. Also, note that many programs call themselves memtest while in practice are quite far from the real one. |
|
![]() |
|
paologab ![]() Newbie ![]() ![]() Joined: 21 Nov 2018 Location: Milan Status: Offline Points: 112 |
![]() ![]() ![]() ![]() ![]() |
hi xhue
[ot] thanks to point that out. It was one of my doubt whether MemTest86 (the one licensed for free by PassMark(TM)) is thaft enough. On my pc I installed linux from scratch in mixed UEFI-legacy mode, so I could use memtest86+ (should be the MemTest86+ also passed to PassMark). This is created as boot option to test the ram by almost any distribution. Then I reverted the boot to UEFI only so memtest86+ didn't work anymore and I had to switch to MemTest86 that can be executed at UEFI boot. Compared to MemTest86, memtest86+ cause much more heat. I mean after a full pattern test made with memtest86+ the chassis was much more warm than it is after 4 passes of full MemTest86. Both ran on all cores, in parallel, with all tests. [/ot] |
|
AMD Ryzen 7 2700X w/Wraith prism
x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |
|
![]() |
Post Reply ![]() |
Page <12 |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |