cannot remove a legacy non-array in AMD-RAID

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   RAID: cannot remove a legacy non-array in AMD-RAID
System Configuration:
Motherboard: ASRock Fatal1ty AB350 Gaming-ITX/ac
CPU: Ryzen 5 2400G
Memory: 16GB DDR4 3200 G.SKILL Ripjaws V
VBIOS: P4.50
SSD: 2x Intel 545s 256GB
HDD: 2x WD Blue 2TB
OS: Windows 10 x64 (1709)
Steps that led me here:
put everything together
freak out briefly because EUFI (version P4.40) reports CPU temp of 120ºC ??search says this is likely a misapplied sensor (more later)
set RAID, create RAID-0 from SSDs, create RAID-1 from HDDs
install Win 10 1607 on RAID-0, using RAID driver from the CD that came with the mobo
install successful, HWMonitor reports 20-30º CPU (yay), but freezes on idle
Windows stops booting with an invalid media error. install disc doesn't give an opportunity to use external drivers for repair.
ok fine. I'll reinitialize the RAID. when I do so, one of the SSDs refuses to release its legacy status.
Troubleshooting:
reset BIOS ??no change to RAID settings
updated to P4.50 ??CPU temp correct now ??
reformatted every drive, plugged them into different ports, alone, with others ??only one drive has the issue.
that drive works fine in other machines, and in this one on AHCI
I'm trying right now to get RAIDxpert installed on a completely different drive, but Windows (1709 now) refuses to install the RAID drivers without the RAID, refuses to boot from USB, and refuses to boot from RAID without the drivers. ?��

I'm getting really close to just giving up, using the SSDs individually with software RAID-1 on the HDDs. any thoughts?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
angille Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 15 Apr 2018 Location: PDX Status: Offline Points: 3	Post Options Post Reply Quote angille Report Post Thanks(0) Quote Reply Topic: cannot remove a legacy non-array in AMD-RAID Posted: 15 Apr 2018 at 6:08am
	RAID: cannot remove a legacy non-array in AMD-RAID System Configuration: Motherboard: ASRock Fatal1ty AB350 Gaming-ITX/ac CPU: Ryzen 5 2400G Memory: 16GB DDR4 3200 G.SKILL Ripjaws V VBIOS: P4.50 SSD: 2x Intel 545s 256GB HDD: 2x WD Blue 2TB OS: Windows 10 x64 (1709) Steps that led me here: put everything together freak out briefly because EUFI (version P4.40) reports CPU temp of 120ºC ??search says this is likely a misapplied sensor (more later) set RAID, create RAID-0 from SSDs, create RAID-1 from HDDs install Win 10 1607 on RAID-0, using RAID driver from the CD that came with the mobo install successful, HWMonitor reports 20-30º CPU (yay), but freezes on idle Windows stops booting with an invalid media error. install disc doesn't give an opportunity to use external drivers for repair. ok fine. I'll reinitialize the RAID. when I do so, one of the SSDs refuses to release its legacy status. Troubleshooting: reset BIOS ??no change to RAID settings updated to P4.50 ??CPU temp correct now ?? reformatted every drive, plugged them into different ports, alone, with others ??only one drive has the issue. that drive works fine in other machines, and in this one on AHCI I'm trying right now to get RAIDxpert installed on a completely different drive, but Windows (1709 now) refuses to install the RAID drivers without the RAID, refuses to boot from USB, and refuses to boot from RAID without the drivers. ?�� I'm getting really close to just giving up, using the SSDs individually with software RAID-1 on the HDDs. any thoughts?