Undervolting Asrock B760 |
Post Reply |
Author | |
xtraco
Newbie Joined: 10 May 2024 Status: Offline Points: 55 |
Post Options
Thanks(0)
Posted: 01 Sep 2024 at 10:12am |
Do you have following options in BIOS?
OC Tweaker \ FIVR Configuration Ring Voltage Mode = Override Ring Voltage Override = 1.11v Not sure if they are available on non-Z mothorboards. If they are present on B760, then there is "Guideline: Undervolting 13700KF + ASRock Z790M" on overclock.net. I'm looking for mobo which works well for both 12400F and 13700KF (requires undervolting) ... let me know if the above mentioned hint available on b760. That motherboard is perfect for overclocking of 12400F, whould like to use it also for 13700KF without overflocking but with undervolting. |
|
mdskfx
Newbie Joined: 23 Apr 2024 Location: Indiana Status: Offline Points: 240 |
Post Options
Thanks(0)
|
not sure if you have moved on or you figured out how to make this set up work. I just got done undervolting/overclocking my i5-12600K on the Z690 phantom gaming. I found where other people had overclockced the P-cores individually and left the E-cores set. When I tried their voltage settings my system would crash of thermal throttle in R23 benchmark. I was using intel XTU to do quick changes and found out that I was needing to undervolt and not add voltage to the CPU. I'm not 100% sure if all ASRock Bios are the same, but after doing some digging, I was finally able to find where to put the voltage in on the Bios level. In the "OC Tweeker" menu, go to the FIVR file and open it up. Down on the 5th should be "Core Voltage Offset" if you have an "Offset Prefix" line this is where you will put in the +/-. If you don't have this line, then you will put the "-" in the Voltage Offset line. Down father you can also change the E-core Voltage Offset and apply the same technique. Hopefully this helps if you still have this setup and you just didn't decide for the stock settings.
|
|
ubronan
Newbie Joined: 14 Jul 2023 Location: netherlands Status: Offline Points: 75 |
Post Options
Thanks(0)
|
I would simply sell the Cooler and buy a new one so you have a fitting cooler setup.
Most people who buy Intel cpu never really check how insane hot the new generation of Intel cpu's become I actually always tell them to buy a huge cooler and tell them that it will still hit it's limit pretty darn quick as it need most of the time an uncomfortable high revs running water cooler I am not even talking about the big gun which actually is almost always too hot for normal people who do not wanna play with excessive cooling solutions and alot of tweaking and tinkering to shave of some of the insane heat it produces. I do not blame the users who bought this but Intel in it's infinte wisdom and not being able to really have a solution other than making again a power slurping monster which of course heats up enormous does make a fast cpu but in my view not a winner. The fact that it is insane power hungry and is beaten in games on many cases by a about 80 watt using AMD cpu says enough. Intel needs to get onto the smaller die factor quick as a power slurper cpu is not the right answer. |
|
imaterial
Newbie Joined: 07 Jun 2023 Location: Indonesia Status: Offline Points: 60 |
Post Options
Thanks(0)
|
Hello, I want to know how to adjust and undervolting at B760, all I see on the website is the Z series or other products,
this happened when I notice that my CPU 13700KF hit 100 degrees even before 100% load, that was my mistake in choosing 280cm AIO kyo sama and I thought I can tame 13700kf. |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |