M.2 mounting screw on Z270 Extreme4

I've had this motherboard for quite a bit now and I've been using one m.2 slot and it's starting to get filled up. I've decided to get another m.2 drive but the mounting screw, the one that originally comes attached to the mobo, is gone, and I've looked everywhere for it. What exact screw size is it? I would like to buy this screw so I can install my new drive.

Hello, yeah it's the standoff, I must've somehow removed it by accident when putting my first m.2 ssd and lost it, is that standoff a certain measure so I could purchase it? Thanks.

DatOneSkullDozer wrote: Hello, yeah it's the standoff, I must've somehow removed it by accident when putting my first m.2 ssd and lost it, is that standoff a certain measure so I could purchase it? Thanks.

The same website that has the screw I linked to above, also sells the standoffs, on this page:

https://www.moddiy.com/products/Premium-M2-Motherboard-Hex-Stand%252dOff-%283mm-to-20mm%29.html

Of course, you'll need the size (height) of the standoff. The best I can tell you is it is a 7mm height standoff. That was measured on an ASRock Z97 Extreme6 board that I don't have mounted in a PC currently. It is important to get the correct height so the M.2 SSD will fit correctly in the M.2 slot, and be parallel to the board.

The M.2 slot on your board probably uses the same height standoff, but of course I cannot 100% guarantee that. Also, since I was measuring the height of the standoff with a ruler, I could be off by a millimeter. Since these standoffs cost all of 0.09¢ each, I suggest getting one in every size from say 6mm to 8mm. There is no 9mm available, and 10mm would be too high, given what I have seen used in ASRock boards. I've been using M.2 SSDs in ASRock boards since their Z97 boards, up to Z270, and X370, and they all seem to be the same size in those boards.

The height of the standoff is not the only important factor, the threads on the standoff of course matter too. That's why I would recommend purchasing them from a source like in the link above, to get the correct part. Otherwise I have no idea what the threads on the standoff are.

please help me. I want to know the exact size of the M.2/NVMe standoff screw size. I have the screw but the motherboard doesn't contain the m.2 standoff screw by its self. now I want to purchase this please tell me the exact size. Anyone help me please

will it work£

https://paste.pics/BVUE0