Booting slowed down after adding an Intel LAN card

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I own an Asrock Z790 PRO RS motherboard with the latest BIOS installed (15.01).

I have Fast Boot set to Disabled because I enjoy seeing what goes on behind the scenes. Plus, the regular boot was fast enough.

A couple of days ago I added an Intel X550-T2 PCIe LAN card to the PCIE3 port (right below the graphics card).

After that, I noticed that everytime my PC boots up, it takes a few good seconds before it starts to properly boot, and during that time I see the white underscore "_" at the top left of my screen. In the past, I used to see it for half a second, now it stays on for a few seconds before the whole boot process starts.

The Intel card works fine in my system, but I'm worried about this delay - what could be the issue?

Thanks!

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
pinkish Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 05 Apr 2017 Status: Offline Points: 23	Post Options Post Reply Quote pinkish Report Post Thanks(0) Quote Reply Topic: Booting slowed down after adding an Intel LAN card Posted: 4 hours 10 minutes ago at 6:19am
	I own an Asrock Z790 PRO RS motherboard with the latest BIOS installed (15.01). I have Fast Boot set to Disabled because I enjoy seeing what goes on behind the scenes. Plus, the regular boot was fast enough. A couple of days ago I added an Intel X550-T2 PCIe LAN card to the PCIE3 port (right below the graphics card). After that, I noticed that everytime my PC boots up, it takes a few good seconds before it starts to properly boot, and during that time I see the white underscore "_" at the top left of my screen. In the past, I used to see it for half a second, now it stays on for a few seconds before the whole boot process starts. The Intel card works fine in my system, but I'm worried about this delay - what could be the issue? Thanks!