ASRock X470 Master SLI with Ryzen 5 crashes always

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic


   Hi there, I had always crashes with my old MSI so I bought a new 
ASRock X470 Master SLI
together with an 
AMD Ryzen 5 2600X 
and 
Corsair DIMM 16GB DDR4-2666 Kit
But now I also get always crashes when I do NOT OC or set everything to "Auto". I even changed the power to 600W but to no avail till now.
Maybe some tweaking could prevent this.
The crashes only happen when I start an VM which have 50% of the CPU and I watch some Netflix meanwhile or when I try to do some memtests (all 16 GB) or some other things that use some real power. Maybe the Volts are set to low?
What are your suggestions on how I could set everything?
When I start the Asroc Tuning Utility it is set to "Performance Mode" and the settings in the OC Tweaker Tab are set to
CPU Speed 3600 MHz
CPU Voltage 1.18750 V
DRAM Voltage 1.200 V
1.05V_PROM Voltage 1.150 V
1.50V_PROM Voltage 2.600 V
VTT DDR Voltage 0.600 V
VPPM Voltage 2.500 V
+ 1.8V Voltage 1.800 V
VDDP Voltage 0.920 V

I would be glad for any advice you can give :)

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Taldrit Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 17 May 2018 Status: Offline Points: 3	Post Options Post Reply Quote Taldrit Report Post Thanks(0) Quote Reply Topic: ASRock X470 Master SLI with Ryzen 5 crashes always Posted: 17 May 2018 at 4:49am
	Hi there, I had always crashes with my old MSI so I bought a new ASRock X470 Master SLI together with an AMD Ryzen 5 2600X and Corsair DIMM 16GB DDR4-2666 Kit But now I also get always crashes when I do NOT OC or set everything to "Auto". I even changed the power to 600W but to no avail till now. Maybe some tweaking could prevent this. The crashes only happen when I start an VM which have 50% of the CPU and I watch some Netflix meanwhile or when I try to do some memtests (all 16 GB) or some other things that use some real power. Maybe the Volts are set to low? What are your suggestions on how I could set everything? When I start the Asroc Tuning Utility it is set to "Performance Mode" and the settings in the OC Tweaker Tab are set to CPU Speed 3600 MHz CPU Voltage 1.18750 V DRAM Voltage 1.200 V 1.05V_PROM Voltage 1.150 V 1.50V_PROM Voltage 2.600 V VTT DDR Voltage 0.600 V VPPM Voltage 2.500 V + 1.8V Voltage 1.800 V VDDP Voltage 0.920 V I would be glad for any advice you can give :)

gizmic Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677	Post Options Post Reply Quote gizmic Report Post Thanks(0) Quote Reply Posted: 21 Jun 2018 at 5:44pm
	i'd start by bumping the vcore or dram or run some stress test like prime or cinebench for example i'm currently working the other way around as auto sets my vcore too high and i'm lowering it by the day