ASRock.com Homepage
Forum Home Forum Home > Technical Support > Intel Motherboards (German)
  New Posts New Posts RSS Feed - kein xmp-Profil möglich
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

kein xmp-Profil möglich
 Post Reply Post Reply
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
robert1962 View Drop Down
Newbie
Newbie


Joined: 21 Apr 2023
Location: Erftstadt
Status: Offline
Points: 20 		Post Options Post Options   Thanks (0) Thanks(0)   Quote robert1962 Quote  Post ReplyReply Direct Link To This Post Topic: kein xmp-Profil möglich
    Posted: 21 Apr 2023 at 4:40pm
Ich habe mir am 23.01.2023 einen neuen PC zusammen gestellt und zusammen bauen lassen.

Im PC ist verbaut:

Mainboard - ASRock Z690 Phantom Gaming 4 D5
Prozessor - Intel Core i9-13900K 24y 3.00 GHz
RAM       - 128 GB DDR5-RAM, 5200 MHz
            Corsair Dominator Platinum RGB

Problem ich kann im BIOS (12.1) kein xmp-Profil einstellen,
dann läd der PC sehr langsam und bringt den Fehler:

"The system failed to boot serveral times before. You may press F2 or Dell to enter ... Or BIOS will continue to boot after 10 seconds."

Wenn ich statt xmp auf auto stelle oder default lade,
laufen die RAM mit 3.600 MHz.

Bekomme beim Bootvorgang oben links einen wei?en (nicht blinkenden Strich)
der für einige Sekunden dort steht und dann bootet das System (Windows 11 Pro) ohne Probleme normal durch.

Ich würde aber gerne die 5.200 MHz der Rams (also xmp-Profil) nutzen können.

Das Computer-Fachgeschäft kann mir da nicht helfen, meinen das geht wohl nicht.
Back to Top
lordwinman View Drop Down
Newbie
Newbie


Joined: 22 May 2023
Status: Offline
Points: 125 		Post Options Post Options   Thanks (0) Thanks(0)   Quote lordwinman Quote  Post ReplyReply Direct Link To This Post Posted: 23 May 2023 at 8:42am
I have the same problem but with the z790 pro rs ddr 5...i adjusted some voltages to get my ddr5 (4x16) 64g 5600mhz to run at maximum 5400Mhz using xmp 3.0...Look at my post Lord winman
Back to Top
ubbs View Drop Down
Newbie
Newbie
Avatar

Joined: 27 May 2023
Status: Offline
Points: 30 		Post Options Post Options   Thanks (0) Thanks(0)   Quote ubbs Quote  Post ReplyReply Direct Link To This Post Posted: 27 May 2023 at 10:09pm
Mainboard - ASRock Z690 Phantom Gaming 4 D5
#
Hersteller?
RAM       - 128 GB DDR5-RAM, 5200 MHz
#
https://pg.asrock.com/MB/Intel/Z690%20Phantom%20Gaming%204D5/index.de.asp#Memory
#
Hast du deine RAM mit der Liste abgeglichen? bzw. danach ausgewählt?
#
Wie zu lesen in Goggel, mit der Spannung opperarieren -:)
immer schrittweise vorgehen 1,40 / 1,41 / 1,42 u.s.w.
Versuchs mal
ASRockZ590PGVelocita
INTEL I7 11700
SapphireRadeonRX550Pulse
G.SkillAegis16GBKitDDR4
ARCTICLiquid FreezerII240
Corsair TX650M-NT 650 Watt
BeQuietShadow-Wings/PureWings
WD-V8P500BW+WD-SN850X1TBPCI4.0
Back to Top
lordwinman View Drop Down
Newbie
Newbie


Joined: 22 May 2023
Status: Offline
Points: 125 		Post Options Post Options   Thanks (1) Thanks(1)   Quote lordwinman Quote  Post ReplyReply Direct Link To This Post Posted: 28 May 2023 at 6:46pm
Yes my ddr5 is on the list of qualified memory for my MB. When using 2 ddr5 sticks there was no issue everything worked fine.When i added 2 more ddr 5 sticks thats where it gave me the same problem like you. I had to change some bios settings to get my 4 ddr5 sticks to work properly. My DDR5 5600mhz is rated at 1.25v.
Back to Top
lordwinman View Drop Down
Newbie
Newbie


Joined: 22 May 2023
Status: Offline
Points: 125 		Post Options Post Options   Thanks (1) Thanks(1)   Quote lordwinman Quote  Post ReplyReply Direct Link To This Post Posted: 28 May 2023 at 7:16pm
My bios setting changes Uefi bios 6.03 z70 pro rs.
Using 4 Dimms DDR5 rated at 5600mhz @ 1.25v Cosair CMK32GX5M2B5600C36
Go to the.... Dram Configuration Tab set to
Xmp profile 3.0 profile 1
Dram gear mode = gear2
Dram Freq= 5600mhz Adjust to your ddr5 speed

Go to Voltage Configuration Tab set to
VDD_CPU voltage=1.4v
VDD_IMC voltage=1.45v
Voltage Mode= OC mode
PMIC Voltage option= separate
VDD Voltage A1-A2-B1-B2 =1.25v
VDDQ Voltage A1-A2-B1-B2=1.25v
Save and exit.
Back to Top
ubbs View Drop Down
Newbie
Newbie
Avatar

Joined: 27 May 2023
Status: Offline
Points: 30 		Post Options Post Options   Thanks (0) Thanks(0)   Quote ubbs Quote  Post ReplyReply Direct Link To This Post Posted: 28 May 2023 at 7:42pm
Thank`s.

# undervolt this RAM, not bad -:)
ASRockZ590PGVelocita
INTEL I7 11700
SapphireRadeonRX550Pulse
G.SkillAegis16GBKitDDR4
ARCTICLiquid FreezerII240
Corsair TX650M-NT 650 Watt
BeQuietShadow-Wings/PureWings
WD-V8P500BW+WD-SN850X1TBPCI4.0
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.188 seconds.